Muller Hour Counter, 7 digits, Screw Connection, 24 V ac

  • RS-stocknr. 854-324
  • Fabrikantnummer BW 40.28 24V
  • Fabrikant Muller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Motor Driven

Low noise
Decimal digits are white, whilst the others are red
Supplied with panel clip and bezel for mounting through 50mm dia. hole
46 x 46mm cut out

Muller Hour Meter

The Muller BW40 series, a motor-driven hour meter is 7-digit analogue display, panel mount device. It has a supply voltage rating of 24VAC. It is supplied with a panel clip and bezel for mounting through a 50mm diameter hole. It has a meter accuracy of 0.01 hours.

Features and Benefits

Low noise Decimal digits are white, while the others are red Easy to connect with a plug-in, screw terminals and solder connection Cut-out dimensions are 46mm x 46mm Touch proof connections to VBG4 Measurement range is between 0 and 99999 Operation temperature ranges between -15°C and 55°C

Applications

Measuring of operating hours in control cabinets and plants Operating hours of pumps and machines

Certifications

IP54 rated

Specificaties
Kenmerk Waarde
Connection Type Screw
Input Type Voltage
Count Capacity 99999
Reset Method No Reset
Supply Voltage 24 V ac
Number of Digits 7
Display Range 0 99999
Digit Height 4.4 mm
Maximum Measurement 99999h
Function Hour Meter
Minimum Operating Temperature -15°C
Measurement Range 0 99999
Maximum Operating Temperature +55°C
Mounting Type Panel Mount
Depth 38mm
Cutout Width 46mm
Series BW40
Cutout Size 46 x 46 mm
Cutout Height 46mm
Meter Accuracy 0.01h
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
43 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
16,57
(excl. BTW)
20,05
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,57
5 - 9
€ 16,07
10 +
€ 15,40
Related Products
The Hengstler 886 series digital counter is a ...
Description:
The Hengstler 886 series digital counter is a button reset predetermining batch counter and panel mount device. This counter has a voltage input device. It also has a 5-digit display and has a supply voltage rating of 24VDC. It is ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
The Baumer NE210 series digital counter is a ...
Description:
The Baumer NE210 series digital counter is a single preset, programmable and panel mounted device. This counter has a logic input and relay output. It also has a 5-digit LED display and the scaling factor ranges from 0.001 and 99.999. ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...