Omron Hour Counter, 6 digits, LCD, Screw Connection, 12 → 24 V dc

  • RS-stocknr. 204-5061
  • Fabrikantnummer H7GP-TD
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Hour Meter - H7GP

NPN/PNP selectable by DIP switch
Time range selectable by DIP switch
Electrical or Manual reset
EEPROM memory

Specificaties
Kenmerk Waarde
Connection Type Screw
Display Type LCD
Input Type Voltage
Count Capacity 99999.9
Reset Method Manual
Supply Voltage 12 → 24 V dc
Number of Digits 6
Display Range 0 → 99999.9
Digit Height 8.5 mm
Maximum Operating Temperature +55°C
Weight 75g
Minimum Operating Temperature -10°C
Measurement Range 0 → 99999.9
Series H7GP
Mounting Type Panel Mount
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
143,10
(excl. BTW)
173,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 143,10
5 - 9
€ 138,73
10 +
€ 135,72
Related Products
Description:
DIN 48 x 48 format with a host of functions4-digit counter with simple presettingBacklit LCD displayCounter is simple to program and easily integrated into standardised sectionsComplies with all necessary European standardsFunction selection via DIP switchProtection rating IP66Functions:- Addition (forwards)- ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...