ON Semiconductor Touch Switch Shield Evaluation Board Capacitive Touch Evaluation Board for LC717A00AR-NH, PCA9655EMTTXG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ON Semiconductor Evaluation Board

The ON Semiconductor touch switch shield evaluation board is a capacitive touch board for LC717A00AR-NH. It is a high-performance, low-cost capacitance-digital-converter LSI for the electrostatic capacitive touch sensor, especially focused on usability. This makes it ideal for various switch applications. The calibration function is performed automatically by the built-in logic circuit during the activation of power or environmental changes. In addition to this, due to the pre-configuration of initial settings of parameters, such as gain, LC717A00AR can operate in standalone mode when the recommended switch pattern is applied.

Features and Benefits:

8 channels capacitance-sensor input Automatic calibration function The built-in logic circuit can detect the state (on/off) of each input and output

Applications:

Digital signage Industrial and building automation Medical, automotive and appliances Vending machine

Certifications:

ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
User Interface Capacitive Touch
Featured Device LC717A00AR-NH, PCA9655EMTTXG
For Use With LC717A00AR-NH, PCA9655EMTTXG
Kit Classification Evaluation Board
Kit Name Touch Switch Shield Evaluation Board
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
11,48
(excl. BTW)
13,89
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,48
Related Products
The Renesas DISPLAY IT Human Machine Interface (HMI) ...
Description:
The Renesas DISPLAY IT Human Machine Interface (HMI) solution has a Graphical User Interface (GUI) that accommodates the 32-bit RX600 Microcontroller family. The unit incorporates the exDMA peripheral allowing it to drive a TFT. The HMI Solution Kit Enables straightforward ...
Renesas presents the Display It kit for the ...
Description:
Renesas presents the Display It kit for the RZ/A1 processor Cortex A9 based MPU. The solution kit is unique featuring up to 10MB of embedded RAM; it is a perfect solution for Human Machine Interface (HMI) helping the user to ...
Build your own mobile robot with a BASIC ...
Description:
Build your own mobile robot with a BASIC Stamp 2 microcontroller brain. Follow the clear, step-by-step instructions and illustrations in the included book: 'Robotics with the Boe-Bot'. No programming or electronics experience is needed.The Boe-Bot robot takes about 1-2 hours ...
The Silicon Labs ZigBee Wi-Fi/Ethernet Gateway Reference Design ...
Description:
The Silicon Labs ZigBee Wi-Fi/Ethernet Gateway Reference Design (RD-0001-0201) adds ZigBee connectivity to your Wi-Fi or Ethernet network. With the addition of another reference design, you can quickly demonstrate wireless lighting, contact sensors and capacitive touch switches.It runs on Debian ...