Elesa-Clayton Hydraulic Breather Cap 56671, G 1/2" , 42mm diameter

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: IT
Productomschrijving

Elesa SFP Breather Caps with Splash Guard

Resistant to solvents, oils, greases and other chemical agents
Complete with ELESA patented splash guard device that prevents oil loss
Fitted with integral splash guard and suitable for use where oil is violently agitated
Polyamide Technopolymer construction
NBR synthetic rubber seal
Maximum Temperature: 120°C

//media.rs-online.com/t_line/L283314-01.gif
Specificaties
Kenmerk Waarde
Connection Thread G 1/2
Cap Diameter 42mm
Colour Orange
Cap Material Polyamide
Finish Semi Matte
Maximum Operating Temperature +120°C
Thread Size 1/2in
Thread Standard G
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,57
(excl. BTW)
4,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 3,57
5 - 9
€ 3,43
10 - 24
€ 3,34
25 +
€ 3,27
Related Products
Dust caps suitable for Amphenol 62GB chassis mounted ...
Description:
Dust caps suitable for Amphenol 62GB chassis mounted connectors in the UK Pattern 105 and MIL-C-26482 ranges. A silicone rubber gasket provides sealing to a chassis receptacle. A nylon retention cord is fitted. Suitable for chassis mounted and box-mounted receptaclesSilicone ...
Dust caps suitable for chassis mounted connectors in ...
Description:
Dust caps suitable for chassis mounted connectors in the UK Pattern 105 and MIL-C-26482 ranges. A silicone rubber gasket provides sealing to a chassis receptacle. A nylon retention cord is fitted.
Cap allows the movement of air through the ...
Description:
Cap allows the movement of air through the cap filter element, thus preventing dust from being drawn into the reservoir as the fluid level fluctuates. • Suitable for use with mineral oils• Maximum flow rate 455 L/min• 70 μm filter• ...
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...