Elesa-Clayton Hydraulic Breather Cap 53901, G 3/8" , 31mm diameter

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: IT
Productomschrijving

Standard

Oil breather caps manufactured from a polyamide-based technopolymer with a synthetic rubber packing ring. These breather caps are the ideal choice where a rapid change in liquid volume can be expected such as hydraulic power packs and oil tanks. Resistant to various oils, greases and solvents.

//media.rs-online.com/t_line/L364129-01.gif
Specificaties
Kenmerk Waarde
Connection Thread G 3/8
Cap Diameter 31mm
Colour Orange
Cap Material Polyamide
Finish Semi Matte
Maximum Operating Temperature +120°C
Thread Size 3/8in
Thread Standard G
75 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,33
(excl. BTW)
2,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 2,33
5 - 9
€ 2,23
10 - 24
€ 2,19
25 +
€ 2,12
Related Products
Cap allows the movement of air through the ...
Description:
Cap allows the movement of air through the cap filter element, thus preventing dust from being drawn into the reservoir as the fluid level fluctuates. • Suitable for use with mineral oils• Maximum flow rate 455 L/min• 70 μm filter• ...
SFP-EX breather caps come complete with splash guard ...
Description:
SFP-EX breather caps come complete with splash guard device (ELESA original design) that prevents oil loss and are particularly suitable for use where oil is violently agitated and could be splashed against breather cap.
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...