Parker Single CETOP Mounting Hydraulic Check Valve ZRD-BA01-S0-D1

  • RS-stocknr. 134-7032
  • Fabrikantnummer ZRD-BA01-S0-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 03 Check Valves

Sandwich design check valves from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).

Features and Benefits

• Mountable in any position • High flow capacity
• DIN 24340 A6 / ISO 4401 / NFPA D03 Mounting interface
• 0.7 bar opening pressure
• MTTF 150 years

Check Valves

These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Specificaties
Kenmerk Waarde
Manufacturer Series ZRD
CETOP Mounting CETOP 3
Single/Double Single
Cracking Pressure 0.7bar
Maximum Operating Pressure 350 bar
Maximum Flow Rate 80L/min
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
344,82
(excl. BTW)
417,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 344,82
Related Products
Double union ends with plain bore for solvent ...
Description:
Double union ends with plain bore for solvent cement jointing. Vibration free even at high velocity.
Non-return or check valves which allow flow in ...
Description:
Non-return or check valves which allow flow in one direction only. Suitable for steam, water and oil applicationsMetal-to-metal seatPressure rating 9 bar at 180°C, 20 bar at 100°C.
Two non-return check valves which permit the free ...
Description:
Two non-return check valves which permit the free flow of air in one direction only, protecting the downstream side of the supply in event of an air supply failure. Manufactured from brass with nitrile rubber seals.Operating temperature : -20 to ...
HGL series features pilot operated check valves which ...
Description:
HGL series features pilot operated check valves which allow air to flow provided a signal is present at the pilot signal port. If no pilot signal is applied, the valves shut off the exhaust air from the drive. Festo check ...