Parker Steel Hydraulic Check Valve 2305, G 1, 150L/min, 0.35bar Cracking Pressure

  • RS-stocknr. 237-2492
  • Fabrikantnummer 2305
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Steel Check Valves

Designed to allow flow in one direction and shut-off in the reverse direction.

Nylon seals

Note

Not suitable for use with water.

//media.rs-online.com/t_line/L237244-01.gif
Specificaties
Kenmerk Waarde
Connection Port Thread G 1
Cracking Pressure 0.35bar
Maximum Flow Rate 150L/min
Body Material Steel
Seal Material Nylon
Thread Standard G
Thread Size 1in
Minimum Operating Temperature -30°C
Maximum Operating Temperature +90°C
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
78,80
(excl. BTW)
95,35
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 78,80
5 - 9
€ 76,40
10 +
€ 73,83
Related Products
Sandwich design check valves from Parker Hannifin for ...
Description:
Sandwich design check valves from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. Throttle check is available on port A or B and A + B configurations (See manufacturers part number). • Mountable in any position • ...
A pilot operated sandwich design check valve from ...
Description:
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows ...
Ermeto Original or EO® progressive ring fittings, for ...
Description:
Ermeto Original or EO® progressive ring fittings, for metric tube, are manufactured from mild steel, with zinc plated and passivated finish. They are available in light duty and heavy duty series to cover a wide range of pressure ratings. Each ...
Manufactured from steel these non-return valves are seated ...
Description:
Manufactured from steel these non-return valves are seated metal to metal by means of spring loaded ball housed in an ABS plastic guide.