RS PRO Steel Hydraulic Non-Return Valve, G 3/8, 30L/min

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

Steel Non-return Valves

Manufactured from steel these non-return valves are seated metal to metal by means of spring loaded ball housed in an ABS plastic guide.

Note

Not suitable for use with water.

//media.rs-online.com/t_line/L283829-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series FT260
Connection Port Thread G 3/8
Maximum Flow Rate 30L/min
Body Material Steel
Maximum Operating Pressure 350 bar
Thread Standard G
Thread Size 3/8in
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
51 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
46 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
15,03
(excl. BTW)
18,19
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 15,03
5 - 9
€ 14,56
10 +
€ 14,08
Related Products
High pressure ’L’ bore three way diverter ball ...
Description:
High pressure ’L’ bore three way diverter ball valves with BSP parallel threaded connections at all ports. These valves would be included in most circuits requiring a change over optionSuitable for use with water and oilNitrile seals, Delrin® ball seat. ...
High pressure two-way ball valves with BSP parallel ...
Description:
High pressure two-way ball valves with BSP parallel threaded ports. inch to 1 inch availableBrass ballSuitable for use with water and oilNitrile stem seal.
316 stainless steel 2 way ball valves with ...
Description:
316 stainless steel 2 way ball valves with 3 ball valve options. Valves can be locked in either the open or closed position, panel mount which is cost effective and there is also a firesafe/antistatic option. Reduced bore designAvailable in ...
Non return check valves that can be used ...
Description:
Non return check valves that can be used in various applications up to a pressure of 400 bar and have a cracking pressure of 1 bar. Manufactured from zinc plated steel and use poppet check valve that is damped to ...