RS PRO Stainless Steel, Steel Hydraulic Check Valve, BSP 1/4, 110L/min

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

Stainless Steel Check Valves

Stainless steel BSP in-line check valve.

Metal to metal seal by means of a machined cone
BSP female thread forms

Specificaties
Kenmerk Waarde
Manufacturer Series FT257
Connection Port Thread BSP 1/4
Maximum Flow Rate 110L/min
Body Material Stainless Steel, Steel
Maximum Operating Pressure 400 bar
Thread Standard BSP
Thread Size 1/4in
Minimum Operating Temperature -20°C
Maximum Operating Temperature +200°C
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
97,32
(excl. BTW)
117,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 97,32
5 - 9
€ 94,33
10 +
€ 91,27
Related Products
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
Sandwich design check valves from Parker Hannifin for ...
Description:
Sandwich design check valves from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. Throttle check is available on port A or B and A + B configurations (See manufacturers part number). • Mountable in any position • ...
Ermeto Original or EO® progressive ring fittings, for ...
Description:
Ermeto Original or EO® progressive ring fittings, for metric tube, are manufactured from mild steel, with zinc plated and passivated finish. They are available in light duty and heavy duty series to cover a wide range of pressure ratings. Each ...
The single station gauge isolator valve by Parker ...
Description:
The single station gauge isolator valve by Parker has been designed to prevent pressure gauge damage and extend gauge life.When installed between gauge and pressure line, it protects the pressure gauge from continuous hydraulic pressure, surges or shock loads.Operated by ...