Parker CETOP Mounting Hydraulic Flow Control Valve, ZNS-A01-5-S0-D1, 1-Way

  • RS-stocknr. 134-7053
  • Fabrikantnummer ZNS-A01-5-S0-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 03 Counterbalance Valves

ZNS series CETOP 03 counterbalance use a leak free poppet valve to provide reliable and smooth operation of a hydraulic actuator when overrunning. A pilot valve operated by the inlet flow controls the return flow and ensures smooth and cavitation free motion of the load. CETOP 03 counterbalance valves can be stacked with other flow control valves under directional control valves and subplate mounted.

Features and Benefits

• Controls movement of loads • Leak free poppet for load holding
• Provides secondary releif protection for actuators
• Unrestricted mouting position
• 350 bar maximum operating pressure
• 4.5:1 pilot ratio
• 60 L/min nominal flow rate
• Mounting interface DIN 24340 A6 / ISO 4401 / NFPA D03 compatible
• Available with pressure control on A, B or A & B

Applications

Suitable for general and industrial hydraulic applications and machine tooling.

Note

To ensure safe load holding the setting pressure should be approximately 30% higher than the maximum load pressure.

Counterbalance Valves

Specificaties
Kenmerk Waarde
Manufacturer Series ZNS
CETOP Mounting CETOP 3
Number of Ports 1-Way
Maximum Operating Pressure 350 bar
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
337,12
(excl. BTW)
407,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 337,12
Related Products
A range of hydraulic diverter valves with flow ...
Description:
A range of hydraulic diverter valves with flow rates of either 20, 50 and 90 litres/min which when line mounted can provide up to five additional intermittent functions without affecting the original machine function. The valves can be bolted together ...
Valve offering simple and accurate speed control and ...
Description:
Valve offering simple and accurate speed control and flow regulation. Easy to read flow graduation scale, with position locking screw Built in safety stop prevents unintentional withdrawal of the handwheelRetaining nut included to enable panel mountingNitrile rubber seals0.5 bar cracking ...
The single station gauge isolator valve by Parker ...
Description:
The single station gauge isolator valve by Parker has been designed to prevent pressure gauge damage and extend gauge life.When installed between gauge and pressure line, it protects the pressure gauge from continuous hydraulic pressure, surges or shock loads.Operated by ...
Protect pressure gauge by dampening shock of pressure ...
Description:
Protect pressure gauge by dampening shock of pressure during opening and isolating pressure lineAll valves have swivel adaptor to allow gauge-to-face position required.