Parker CETOP Mounting Hydraulic Flow Control Valve, ZNS-AB01-5-S0-D1

  • RS-stocknr. 134-7057
  • Fabrikantnummer ZNS-AB01-5-S0-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 03 Counterbalance Valves

ZNS series CETOP 03 counterbalance use a leak free poppet valve to provide reliable and smooth operation of a hydraulic actuator when overrunning. A pilot valve operated by the inlet flow controls the return flow and ensures smooth and cavitation free motion of the load. CETOP 03 counterbalance valves can be stacked with other flow control valves under directional control valves and subplate mounted.

Features and Benefits

• Controls movement of loads • Leak free poppet for load holding
• Provides secondary releif protection for actuators
• Unrestricted mouting position
• 350 bar maximum operating pressure
• 4.5:1 pilot ratio
• 60 L/min nominal flow rate
• Mounting interface DIN 24340 A6 / ISO 4401 / NFPA D03 compatible
• Available with pressure control on A, B or A & B

Applications

Suitable for general and industrial hydraulic applications and machine tooling.

Note

To ensure safe load holding the setting pressure should be approximately 30% higher than the maximum load pressure.

Counterbalance Valves

Specificaties
Kenmerk Waarde
Manufacturer Series ZNS
CETOP Mounting CETOP 3
Maximum Operating Pressure 350 bar
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
570,59
(excl. BTW)
690,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 570,59
Related Products
A range of hydraulic diverter valves with flow ...
Description:
A range of hydraulic diverter valves with flow rates of either 20, 50 and 90 litres/min which when line mounted can provide up to five additional intermittent functions without affecting the original machine function. The valves can be bolted together ...
Valves offering simple and accurate speed control and ...
Description:
Valves offering simple and accurate speed control and flow regulation. Easy to read flow graduation scale, with position locking screw Built in safety stop prevents unintentional withdrawal of the handwheelRetaining nut included to enable panel mountingNitrile rubber seals0.5 bar cracking ...
High pressure flow control valves for general purpose ...
Description:
High pressure flow control valves for general purpose use in a hydraulic system. Single ActingEasy to read colour flow graduation scale and a locking screw to stabilise flowNitrile rubber sealsTemp. range -10 to +100°C0.5 bar cracking pressure.
Components for use with the Enerpac range of ...
Description:
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. For use with high pressure hydraulic equipment to control cylinder speedCan also be used ...