Parker CETOP Mounting Hydraulic Flow Control Valve, ZNS-B02-2-S0-D1, 1-Way

  • RS-stocknr. 134-7060
  • Fabrikantnummer ZNS-B02-2-S0-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 05 Counterbalance Valves

ZNS series CETOP 05 counterbalance use a leak free poppet valve to provide reliable and smooth operation of a hydraulic actuator when overrunning. A pilot valve operated by the inlet flow controls the return flow and ensures smooth and cavitation free motion of the load. CETOP 05 counterbalance valves can be stacked with other flow control valves under directional control valves and subplate mounted.

Features and Benefits

• Controls movement of loads • Leak free poppet for load holding
• Provides secondary relief protection for actuators
• Unrestricted mounting position
• 315 bar maximum operating pressure
• 4.5:1 pilot ratio
• 120 L/min nominal flow rate
• Mounting interface DIN 24340 A10 / ISO 4401 / NFPA D05 compatible
• Available with pressure control on A, B or A and B

Applications

Suitable for general and industrial hydraulic applications and machine tooling.

Note

To ensure safe load holding the setting pressure should be approximately 30% higher than the maximum load pressure.

Counterbalance Valves

Specificaties
Kenmerk Waarde
Manufacturer Series ZNS
CETOP Mounting CETOP 5
Number of Ports 1-Way
Maximum Operating Pressure 315 bar
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
467,91
(excl. BTW)
566,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 467,91
Related Products
WRAS approved water management system that complies with ...
Description:
WRAS approved water management system that complies with Bylaw 82 and 83ABS bodyPIR sensor 54μA (nominal current), 750mA (peak current for 50ms), 6Vdc (Voltage)Sensor range 3m – 4mField of view 138º (horizontal), 125º (vertical)Infrared sensor unit may be fitted directly ...
Parker 2 way ball valves interrupt or facilitate ...
Description:
Parker 2 way ball valves interrupt or facilitate the medium flow. The valves can be equipped with a locking device to avoid unauthorised opening and shutting ensuring the system remains safe. • Easy sealing and operation• Consistent quality• Steel• High ...
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...