RS PRO Line Mounting Hydraulic Flow Control Valve, G 3/8, 350 bar

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

RS Pro High Pressure Flow Control - Double Acting

High pressure flow control valves for general purpose use in a hydraulic system.Easy to read colour flow graduation scale and a locking screw to stabilise flow
Nitrile rubber seals
Temp. range -10 to +100°C
0.5 bar cracking pressure

Flow Control Valves

Single acting and double acting in-line flow control valves. Single acting valves allow flow control in one direction and free flow in the opposite direction. Double acting valves allow flow control in both directions.

Specificaties
Kenmerk Waarde
Manufacturer Series NDV
Connection Port Thread G 3/8
Maximum Flow Rate 75L/min
Body Material Steel
Seal Material Nitrile Rubber
Maximum Operating Pressure 350 bar
Thread Size 3/8in
Thread Standard G
Maximum Operating Temperature +100°C
Minimum Operating Temperature -10°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
33,76
(excl. BTW)
40,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 33,76
5 - 9
€ 32,74
10 +
€ 31,67
Related Products
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
ZNS series CETOP 05 counterbalance use a leak ...
Description:
ZNS series CETOP 05 counterbalance use a leak free poppet valve to provide reliable and smooth operation of a hydraulic actuator when overrunning. A pilot valve operated by the inlet flow controls the return flow and ensures smooth and cavitation ...
A range of hydraulic diverter valves with flow ...
Description:
A range of hydraulic diverter valves with flow rates of either 20, 50 and 90 litres/min which when line mounted can provide up to five additional intermittent functions without affecting the original machine function. The valves can be bolted together ...
A fine needle type 2-way directional control valveIdeal ...
Description:
A fine needle type 2-way directional control valveIdeal for sustained load holdingCan also be used for throttling functions3/8in-18 NPT, 700 bar.