Parker Hydraulic Gear Pump, 16cm3

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Fixed Displacement Gear Pump, 1:8 Tapered Shaft

Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.

Up to 275 bar (4000 psi) continuous operation
High efficiency
Low noise
Wide variety of integral valve options
Single and bi-rotational motors

Gear Pumps

Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.

Specificaties
Kenmerk Waarde
Manufacturer Series PGP511
Displacement 16cm³
Direction of Rotation Clockwise
Maximum Rotational Speed 2700rpm
Minimum Rotational Speed 500rpm
Maximum Operating Pressure 250 bar
Body Dimensions 143.3 x 89.5 x 114mm
Body Height 114mm
Body Length 143.3mm
Body Width 89.5mm
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
259,55
(excl. BTW)
314,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 259,55
Related Products
Direction of rotation is clockwise. Nominal displacement is ...
Description:
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s ...
Choice of two barrel pumps, designed for use ...
Description:
Choice of two barrel pumps, designed for use with 40 gallon metal drums, which will pump up to Hypoid 90 viscosityLever action pump (RS 672-425) incorporates 84cm galvanised steel suction tubeRotary action pump (RS 672-419) incorporates 96cm steel suction tube ...
Heavy duty pistonless polythene displacement pump which discharges ...
Description:
Heavy duty pistonless polythene displacement pump which discharges on the down strokeSupplied complete with anti-drip nozzle, thread adaptor for 12mm bore hose, multi-adaptor for raised screw neck closures, adaptor to fit standard plastic drum internal thread and telescopic dip-tube to ...
The SKF 728619 E is a two stage ...
Description:
The SKF 728619 E is a two stage pump suitable for mounting bearings or components with a maximum pressure of 150 MPa. • Oil container capacity 2550 cm³• Two stage pressure pumping• Fitted with pressure gauge and supplied with a ...