Bosch Rexroth Hydraulic Gear Pump 0510725030, 22.5cm3

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Self Aspirating External Gear Pump, 1:5 Tapered Shaft

Plain bearings cater for high load applications
To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern
Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut

Note

Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B10≥100.

Supplied with

Instruction leaflet.

//media.rs-online.com/t_line/L728758-01.gif
//media.rs-online.com/t_line/L728764-01.gif
//media.rs-online.com/t_line/L728770-01.gif

Gear Pumps

Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.

Specificaties
Kenmerk Waarde
Manufacturer Series AZP
Displacement 22.5cm³
Direction of Rotation Clockwise
Maximum Rotational Speed 2500rpm
Minimum Rotational Speed 500rpm
Minimum Speed At Maximum Pressure 700rpm
Maximum Operating Pressure 210 bar
Body Dimensions 115.4 x 90 x 120mm
Weight 3.8kg
Body Height 120mm
Body Length 115.4mm
Body Width 90mm
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
281,13
(excl. BTW)
340,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 281,13
Related Products
Parker PGP/PGM 500 series gear pumps are an ...
Description:
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard ...
Choice of two barrel pumps, designed for use ...
Description:
Choice of two barrel pumps, designed for use with 40 gallon metal drums, which will pump up to Hypoid 90 viscosityLever action pump (RS 672-425) incorporates 84cm galvanised steel suction tubeRotary action pump (RS 672-419) incorporates 96cm steel suction tube ...
Heavy duty pistonless polythene displacement pump which discharges ...
Description:
Heavy duty pistonless polythene displacement pump which discharges on the down strokeSupplied complete with anti-drip nozzle, thread adaptor for 12mm bore hose, multi-adaptor for raised screw neck closures, adaptor to fit standard plastic drum internal thread and telescopic dip-tube to ...
The SKF 728619 E is a two stage ...
Description:
The SKF 728619 E is a two stage pump suitable for mounting bearings or components with a maximum pressure of 150 MPa. • Oil container capacity 2550 cm³• Two stage pressure pumping• Fitted with pressure gauge and supplied with a ...