1800mm Synthetic Rubber Hydraulic Hose Assembly, 400 bar Max Pressure, -40 → +100°C

  • RS-stocknr. 448-5916
  • Fabrikantnummer 448-5916
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Straight/Straight Assembly

High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp is affected by the bite of the serrations in the sleeve on to the hose reinforcement. The reinforcing braid is protected by the external rubber cover, which makes the fitting and hose assembly leak tight. This feature guarantees corrosion protection of the reinforcement and so prolongs the life of the assembly. For further confidence every assembly is proof pressure tested to twice working pressure. Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water. Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel. Manufacturer’s hose type is Parker Type 301 No Skive Hose, with a BSP Straight Swivel Female Each End. Temperature range is -40 to +100°C. All finished assemblies proof pressure tested to twice maximum working pressure. Temperature range -40 to +100°C.

Note

These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi).

Standards

DIN 20022 2SN, EN853-2SN, SAE 100R2 AT

//media.rs-online.com/t_line/L395982-01.gif

Standards

DIN 20022 2SN; EN853-2SN; SAE 100R2 AT

Warning

  • Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.
Specificaties
Kenmerk Waarde
Overall Length 1800mm
Inside Diameter 1/4in
Connector A Straight G 1/4 Female
Connector B Straight G 1/4 Female
Inner Hose Material Synthetic Rubber
Reinforcing Material Steel
Cover Material Synthetic Rubber
Maximum Operating Pressure 400 bar
Connector B - Thread Standard G
Connector A - Angle Straight
Connector B - Thread Size 1/4in
Connector A - Thread Standard G
Connector B - Gender Female
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Connector A - Gender Female
Connector B - Angle Straight
Connector A - Thread Size 1/4in
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
30,79
(excl. BTW)
37,26
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 30,79
5 - 9
€ 29,84
10 +
€ 28,88
Related Products
High-quality flexible hydraulic hose assemblies with crimped end ...
Description:
High-quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fitting (which eliminates an incorrectly matched insert and sleeve) and matching hoses.Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel ...