Parker Hydraulic Level & Temperature Gauge S.690053

  • RS-stocknr. 196-2735
  • Fabrikantnummer S.690053
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Level and Temperature Gauge

Designed to add style and efficiency to tank installations. These fluid level temperature gauges have a co-ordinated design with modular air breathers. The gauges are compatible with mineral and petroleum-based fluids due to their construction from high strength, aluminium free materials.

Features and Benefits

• High visibility one piece polyamide lens
• Universal front or rear fixing
• M10 and M12 bolt thread options
• 3 sizes with or without thermometer – 76 mm, 127 mm and 254 mm
• High impact polystyrene shroud
• For use on pressurised tanks up to 1 bar

Product and Application Information

Simple to install and designed for either front or rear fixing. After positioning the gauge, the bolts are tightened to provide a secure seal with no fear of leaking.

Supplied with

gasket

//media.rs-online.com/t_line/L331953-02.gif
//media.rs-online.com/t_line/LF196273-02.gif
//media.rs-online.com/t_line/LI196273-01.gif
Specificaties
Kenmerk Waarde
Scale Length 76mm
Maximum Operating Pressure 1 bar
Minimum Operating Temperature -30°C
Maximum Operating Temperature +90°C
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
21,09
(excl. BTW)
25,52
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,09
5 - 9
€ 20,45
10 +
€ 19,77
Related Products
For OEMs needing Intrinsically Safe pressure with consistent ...
Description:
For OEMs needing Intrinsically Safe pressure with consistent high levels of performance, reliability and stability, the 31IS Series offers a wide range of industrial pressure transmitters in a small package size. They feature all-stainless steel wetted parts, a broad selection ...
The Volkel Go ring gauge M2x0.5 is calibrated ...
Description:
The Volkel Go ring gauge M2x0.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go No-Go plug gauge M14x2 is ...
Description:
The Volkel Go No-Go plug gauge M14x2 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel No-Go ring gauge M14x2 is calibrated ...
Description:
The Volkel No-Go ring gauge M14x2 is calibrated at a measurement laboratory using IAC thread scanners. This NO-GO thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...