Parker Hydraulic Straight Threaded Coupling 10F42EDMXS, Connector B BSPP 1/2-14 Male

  • RS-stocknr. 871-2307
  • Fabrikantnummer 10F42EDMXS
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PL
Productomschrijving

Male Stud BSPT

Triple-Lok® 37° fittings have a reliable leak free connection and are an excellent solution in high pressure hydraulic areas. Typical applications are in the military, agriculture, construction and engine transmission.

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Specificaties
Kenmerk Waarde
Connector B BSPP 1/2-14 Male
Material Steel
Finish Zinc Chromium 6
Connector B - Gender Male
Connector B - Thread Standard BSPP
Maximum Operating Pressure 5000 psi
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
9,31
(excl. BTW)
11,27
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 9,31
5 - 9
€ 8,93
10 - 24
€ 8,73
25 +
€ 8,54
Related Products
Triple-Lok 37° flared fittings are for use with ...
Description:
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for ...
Reducing thread adaptors with male (Rs) BSP parallel ...
Description:
Reducing thread adaptors with male (Rs) BSP parallel thread to female (Rp) BSP parallel thread. Male thread is sealed at the port connection with a nitrile rubber seal. Operating temperature range without pressure reductions is -30 to +100°C. Manufactured from ...
Description:
A range of equal and unequal male BSP parallel thread adaptors.Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, ...
Parkers K series adapters are manufactured to meet ...
Description:
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used ...