Parker Hydraulic Suction Strainer, SE75231210, 50L/min 1 in

  • RS-stocknr. 331-9587
  • Fabrikantnummer SE75231210
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Complete One Piece Suction Strainers

One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder and filter media are epoxy bonded to form a one piece contrsuction.

//media.rs-online.com/t_line/L728950-01.gif
//media.rs-online.com/t_line/L728972-01.gif
//media.rs-online.com/t_line/LD728972-01.gif
//media.rs-online.com/t_line/LI728972-01.gif
Specificaties
Kenmerk Waarde
Filtration Size 125µm
Maximum Flow Rate 50L/min
Connection Thread BSP 1
Overall Length 139.5mm
Overall Diameter 64mm
Maximum Operating Temperature +90°C
Thread Standard BSP
Thread Size 1in
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
42 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
18,62
(excl. BTW)
22,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 18,62
5 - 9
€ 18,05
10 +
€ 17,47
Related Products
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...