Panduit 26-Way IDC Connector Plug Through Hole Mount, 2-Row

  • RS-stocknr. 482-238
  • Fabrikantnummer 057-026-053
  • Fabrikant Panduit
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Boxed Headers

2-row boxed headers compatible with BT224 type bump polarised and universal sockets
Polyester mouldings to UL94-V with gold plated copper alloy contacts
Solder spill connections on a 0.1in grid will be suitable for standard 1.6mm thick PCBs

Note

Overall header length = 7.9 + (no. of ways x 2.54) mm

Standards

IDC; BT224

Specificaties
Kenmerk Waarde
Number of Contacts 26
Number of Rows 2
Gender Male
Pitch 2.54mm
Mounting Type Through Hole
Body Orientation Right Angle
Termination Method Solder
Current Rating 3A
Contact Plating Gold over Nickel
Series 057
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Voltage Rating 300 V ac
Contact Material Copper
Housing Material Glass Fibre Reinforced PET
132 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1,53
(excl. BTW)
1,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1,53
Related Products
MTA-100 closed end MTA-100 IDC receptacle connectors for ...
Description:
MTA-100 closed end MTA-100 IDC receptacle connectors for the mass termination of wires in a wide variety of applications. The connectors are pre-loaded with dual beam slotted IDC contacts which eliminate the need for wire stripping and enable one-step assembly. ...
A range of low profile 1.27 mm Pitch ...
Description:
A range of low profile 1.27 mm Pitch Picoflex Headers for use with 90327 Series housings, see stock number 324-8047 typical. Fitted with friction lock, polarisation and stamped contacts with in-line flat tabsRigid solder tails require 0.8mm hole.
The Picoflex Series from Molex is a reliable ...
Description:
The Picoflex Series from Molex is a reliable range of Wire to Board connectors offering designers more options for high-density applications where standard discrete wire and flat flexible connectors are not appropriate. Picoflex IDT connectors are ideal for automotive and ...
2mm pitch wire traps for topcoated ribbon cable. ...
Description:
2mm pitch wire traps for topcoated ribbon cable. These vertical 2mm pitch wire traps have a pull-cover and accept a 26 AWG wire size with an insulation diameter of 1.60mm max. The strip length that these wire traps can accept ...