Stelvio Kontek 6-Way IDC Connector Socket for Cable Mount, 1-Row

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Autocom HE13 90° Connectors

From Stelvio Kontek, this range of AUTOCOM Single Row IDC Connectors with 90° exit are designed to receive flat or single wire cables in size ranges are 22-24 AWG and 26-28 AWG. Suitable for a variety of low voltage applications, these AUTOCOM IDC Connectors are side stackable and have Double blade contacts. They are encased in black GF Thermoplastic and have an insulation resistance of 105 MΩ min, and a contact resistance of ≤20 mΩ.

Standards

HE13, HE14, IEC 603-8

//media.rs-online.com/t_line/L189943-24.gif

2.54mm Kontek Comatel HE13 IEC603-8 Range

Gold plated board to board/board to wire interconnection system

Specificaties
Kenmerk Waarde
Number of Contacts 6
Number of Rows 1
Gender Female
Pitch 2.54mm
Mounting Type Cable Mount
Body Orientation Right Angle
Termination Method IDC
Current Rating 3A
Contact Plating Gold over Nickel
Series Autocom
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Voltage Rating 500 V ac
Contact Material Phosphor Bronze
Housing Material PET
670 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
470 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,911
(excl. BTW)
1,102
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
€ 0,911
€ 9,11
250 - 990
€ 0,729
€ 7,29
1000 - 2490
€ 0,526
€ 5,26
2500 - 4990
€ 0,503
€ 5,03
5000 +
€ 0,481
€ 4,81
*prijsindicatie
Related Products
MTA-100 closed end MTA-100 IDC receptacle connectors for ...
Description:
MTA-100 closed end MTA-100 IDC receptacle connectors for the mass termination of wires in a wide variety of applications. The connectors are pre-loaded with dual beam slotted IDC contacts which eliminate the need for wire stripping and enable one-step assembly. ...
Milli-Grid Cable-to-Board Receptacle, Dual Row, IDT, Lead-Free, 24 ...
Description:
Milli-Grid Cable-to-Board Receptacle, Dual Row, IDT, Lead-Free, 24 Circuits, 0.38μm Gold (Au) Selective Plating, with Center Polarization Key and Locking Friction Ramp.
Tin plated board to board/board to wire interconnection ...
Description:
Tin plated board to board/board to wire interconnection system. Single row IDC connectors with right angle exit for flat or single wire cablesNo special prepration of cables requiredCan be assembled by handDouble blade contactsRated at 3A/1000VFlammabilty rating UL94 V-0.
Ultra-thinAccepts 26awg wireMetal strain relief for vibration resistance ...
Description:
Ultra-thinAccepts 26awg wireMetal strain relief for vibration resistance Crimp tool stock no. 311-6495.