Hand tool-Picoflex PF-50 IDT receptacles

  • RS-stocknr. 542-8093
  • Fabrikantnummer 69008-1090
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Molex IDC Termination Hand Tool for Feed-Thru and Feed-To Harness

From Molex a manual IDC (Insulation Displacement Connector) termination tool made from high-quality materials designed to terminate IDC connectors onto a wiring harness. This tool acommodates both unterminated wire harnesses (Feed-To) and wire harnesses which are already terminated on one end (Feed-Thru). The terminated wire harness is simply fed through the tool allowing the opposite end to be terminated. The hand tool consists of handles, ratchet mechanism and a head in the form of a frame which supports a track, bracket, insertion blades and pusher for aligning the connector and harness during the termination process.

Ratchet Mechanism

The ratcheting is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the termination is complete. Once the cycle is complete the handles will spring open. The ratchet also enables the operator to repeatedly produce consistent, high-quality terminations. If jamming or terminal misplacement occurs the handles can be easily opened by pressing the ratchet release lever

Insertion Blades

The insertion blades on this tool are clearly marked with the connector series on both sides with teeth aligning with the specific connectors terminals. These blades are placed into the pusher on the hand tool. Depending on whether the harness is 'feed-thru' or 'feed-to' the orientation of the blades may need to be changed.

Adjustable Stop Screw

The purpose of the stop screw is to align the terminals of the connector to the teeth on the insertion blade. The stop screw can be adjusted by loosening the lock nut and turning the screw as required.

Adjustable Cable Stop Bracket

The cable stop bracket positions, aligns and supports the harness and connector during termination. To accommodate both feed-thru and feed-to harness terminations the cable stop can be easily rotated

Adjustable Handle Force

Over time it may be necessary to adjust the pre-set handle load force in order to obtain the exact termination conditions. This is achieved by turning a numbered setting wheel with a screwdriver either anti clockwise or clockwise to the next highest number on the dial.

Key Features and Benefits

• Manufactured from high-quality materials
• Acommodates both Feed-To and Feed-Thru wire harness terminations
• Ratchet mechanism ensures a full termination is completed
• Emergency ratchet release lever
• Clearly marked insertion blades
• Adjustable stop screw and stop bracket for accurate alignment and positioning
• Adjustable handle force allows on-going tool adjustment

Applications

This IDC hand termination tool is designed for use in low volume, prototype and field repair applications.

Questions and Answers

What Terminals can this IDC Termination Tool be used with?
This hand tool is designed for terminating 26 or 28 AWG flat cable onto Molex 1.27mm pitch PicoFlex PF-50 low profile IDC receptacle connectors which have 4 to 26 circuits.

Are there any Spares available for this Tool?
Yes, a main spring is available - see stock number 822-7821

Molex Hand Crimping Tools

5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.478,47
(excl. BTW)
1.788,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.478,47
Related Products
Molex T9999 PremiumGrade series of tools provides the ...
Description:
Molex T9999 PremiumGrade series of tools provides the user with various options of high quality tooling to ensure your application is covered. A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision ...
AFM8 tool frame 24-20 AWG, 4/8 indent suitable ...
Description:
AFM8 tool frame 24-20 AWG, 4/8 indent suitable for many types of contact including HDM, HD and HDF series.A postioner is available for this crimp tool, see stock number 880-2277. This positioner is for use with Termi-Block contacts with a ...
Molex T9999 PremiumGrade series of tools provides the ...
Description:
Molex T9999 PremiumGrade series of tools provides the user with various options of high quality tooling to ensure your application is covered. A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision ...
AMPLIMITE HDF-20 series low profile IDC All-Plastic d-sub ...
Description:
AMPLIMITE HDF-20 series low profile IDC All-Plastic d-sub connectors for round conductor flat ribbon cable. These AMPLIMITE HDF-20 series IDC All-Plastic d-sub ribbon cable connectors have pre-assembled black 94V-0 rated thermoplastic housings and covers, standard 3.05mm mounting holes and are ...