Bulgin C14 Snap-In IEC Plug Male, 10A, 250 V ac

  • RS-stocknr. 484-149
  • Fabrikantnummer BZV01/Z0000/01
  • Fabrikant Bulgin
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TN
Productomschrijving

10A Snap-In Single Pole Fused IEC 320 Vertical

Single pole switching, with or without neon
Fuse drawer protected to PC2, IEC 127//6 (20mm fuse)
250 V ac/10A rated
1//4 in Faston terminals

Note

These Chassis Plugs all accept 5 x 20mm fuses

Approvals

UL Listed, CSA certified, SEMKO, VDE

Specificaties
Kenmerk Waarde
IEC Connector Type C14
Mounting Type Snap-In
Gender Male
Current Rating 10A
Body Orientation Straight
Voltage Rating 250 V ac
61 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
501 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
Was € 11,23
9,72
(excl. BTW)
11,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 9,72
10 - 24
€ 9,34
25 - 49
€ 8,95
50 +
€ 8,55
Related Products
Standard Blind mate drawer plug and receptacle connector ...
Description:
Standard Blind mate drawer plug and receptacle connector housings for use in modular equipment designs. These Standard Blind mate miniature power connectors have a 5mm pitch and robust housings made from blue 94V-0 PBT. The housings feature guide posts for ...
Panel thickness 1.5mmMating socket accepted only when fuse ...
Description:
Panel thickness 1.5mmMating socket accepted only when fuse drawer is closedAccepts 20mm fuses-space provided for one spare250V ac/10A rated, fuse drawer protected to PC2, IEC 127//6Flammability Rating UL94 V-0Use insulating boot stock no. 801-932.
Fused IEC inlet connector accepting 20mm fusesFuse link ...
Description:
Fused IEC inlet connector accepting 20mm fusesFuse link is electrically separate to connectorConnection via 0.25 push on tagsFuse carrier is interlocked and cannot be removedStorage for one spare fuseRated at 240Vac/10ADepth 35mmSuitable hole cutter stock no. 542-302Use insulating boot stock ...
These male panel mount sockets with 5 x ...
Description:
These male panel mount sockets with 5 x 20-mm / double-pole fuse holders are clipped on using harpoons located on the side (SNAP-IN mounting).Connection via Faston terminals.(6.3 x 0.8 mm).Panel mounted with 1.5 mm maximum thickness.C14 type connector.