GF708AMA-AE Sensitec, Inclinometer Sensor

  • RS-stocknr. 123-6294
  • Fabrikantnummer GF708AMA-AE
  • Fabrikant Sensitec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

GF708 MagnetoResistiver Magnetic Field Sensors

The GF708 magnetic field sensors from Sensitec are based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity.
The GF708 sensor can be used for highly sensitive applications with a sensitivity of 130 mV/V/mT. Alternatively it can be used as an indexing sensor.

Features and Benefits
Large air gap
Large permissible air gap tolerances
High switching accuracy
Easy identification of field direction
Simple integration
Allows use of small magnets
Allows detection of smaller particles or material defects (NDT)
Large permissible distance to target
High resolution for magnetic imaging


Product Applications
Suitable applications for the GF708 sensors include switching applications and magnetic field measurement.

Magnetoresistive Sensors, Sensitec

tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 2500)
3,146
(excl. BTW)
3,807
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
2500 +
€ 3,146
€ 7.865,00
*prijsindicatie
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
Magnetoresistive circuits, single axis and double axis comprising ...
Description:
Magnetoresistive circuits, single axis and double axis comprising a Wheatstone bridge with 4 magneto resistive branchesCreate a compensation field to eliminate an unwanted field (offset+, offset-)Can be re-initialised in the event of driftMeasure movement or angular or linear positionsHighly sensitive ...