Panel Mount Indicator Bulb Holder, 12.7mm Panel Hole Diameter

  • RS-stocknr. 565-131
  • Fabrikantnummer T0063AOFAE
  • Fabrikant Arcolectric
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TN
Productomschrijving

Chrome Bezel Panel Indicator

Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully insulated from the panel.

Note

Not suitable for use above 50V.

Specificaties
Kenmerk Waarde
Lampholder Type Panel Mount
Termination Type Tabbed
Diameter 14.7mm
Panel Hole Diameter 12.7mm
Panel Thickness 9.6mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-03-2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
3,87
(excl. BTW)
4,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 3,87
25 - 49
€ 3,41
50 - 99
€ 3,29
100 - 249
€ 3,02
250 +
€ 2,52
Related Products
A range of lamp holders and sockets from ...
Description:
A range of lamp holders and sockets from JKL Components, designed for automotive-type LED lamps. They are suitable for use in replacement LED lamp applications. This range of sockets include; wedge based, bi-pin, G-4 and screw based. Available in PCB ...
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES/MBC filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
Lampholder moulded from thermoplastic with 20% glass fibre. ...
Description:
Lampholder moulded from thermoplastic with 20% glass fibre. Designed for circuit board mounting contact is made to both sides of the circuit board via the lugs (for circuit board thickness 1.5mm ± 0.1mm).
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...