Wedge PCB Mount Indicator Bulb Holder, T1 Lamp Size,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

T1 (5mm) Wedge Base Lampholder

Lampholder moulded from thermoplastic with 20% glass fibre. Designed for circuit board mounting contact is made to both sides of the circuit board via the lugs (for circuit board thickness 1.5mm ± 0.1mm).

//media.rs-online.com/t_line/L811715-01.gif
Specificaties
Kenmerk Waarde
Lampholder Type PCB Mount
Lamp Base Wedge
Termination Type Solder Tag
Diameter 5mm
Length 14 mm
Lamp Size T1
Panel Thickness 1.5mm
1825 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,012
(excl. BTW)
1,225
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
€ 1,012
€ 5,06
125 - 245
€ 0,878
€ 4,39
250 - 495
€ 0,75
€ 3,75
500 - 1245
€ 0,62
€ 3,10
1250 +
€ 0,488
€ 2,44
*prijsindicatie
Related Products
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Panel mounting LED holders for two lead 3mm ...
Description:
Panel mounting LED holders for two lead 3mm and 5mm LEDs. These brass LED holders have a chrome, black or white anodised finish. LEDs are held in place by a push-fit nylon base for 3mm types or a screw-in nylon ...
Direct supply lampholders which can only be used ...
Description:
Direct supply lampholders which can only be used with appropriately rated filament lamps at the voltage listed. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are designed to be used ...
Designed to accept either LED or incandescent BA9s ...
Description:
Designed to accept either LED or incandescent BA9s bulbsRecognised under the component program of ULSupplied with O-ring to enhance water sealing capabilitiesNickel plated brass bodyElectrical connections via solder tagsOperating voltage 6 to 120Vac/dc (dependent on chosen bulb voltage).