LED Screw In Panel Mount Indicator Bulb Holder, 5 mm Lamp Size, 8mm Panel Hole Diameter

  • RS-stocknr. 237-0553
  • Fabrikantnummer A105000AAD
  • Fabrikant Arcolectric
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TN
Productomschrijving

Panel Mount LED Lampholders

Panel mounting LED holders for two lead 3mm and 5mm LEDs. These brass LED holders have a chrome, black or white anodised finish. LEDs are held in place by a push-fit nylon base for 3mm types or a screw-in nylon base for 5mm types. The 5mm focussing reflector types have a recessed parabolic shroud which focuses the light output. The bottom half of the holder unscrews to allow insertion of the LED. Sealed types give protection to IP66.

Specificaties
Kenmerk Waarde
Lampholder Type Panel Mount
Lamp Type LED
Lamp Base Screw In
Termination Type Wire Leads
Diameter 10mm
Length 16.9 mm
Lamp Size 5 mm
Panel Hole Diameter 8mm
Panel Thickness 7mm
228 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
690 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,10
(excl. BTW)
2,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 2,10
25 - 49
€ 1,85
50 - 99
€ 1,78
100 - 249
€ 1,64
250 +
€ 1,36
Related Products
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...
The TW series from Idec features a traditional ...
Description:
The TW series from Idec features a traditional NEMA style switch. Modular construction with Snap-on contacts allows for great flexibility in configuration. Models include illuminated or non-illuminated pushbuttons, pilot lights, selectors, key switches and emergency stop switches. Corrosion resistant octagonal ...
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens. Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholdersØ28.5mm & 31.5mm chromed brass bezel5mm max. ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...