Baumer, M12 x 1, PNP-NO Inductive Sensor 50mm Length, 6 → 36 V dc supply voltage , IP67 Rating

  • RS-stocknr. 103-8486
  • Fabrikantnummer 11148587
  • Fabrikant Baumer
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

M12 detectors

M12 standard inductive detectors, flush mountable.
"Normally open" PNP switching function.
Equipped with a red LED status display.
Protected against short circuits and polarity reversal.
Connected via 2 metre PVC cable or via M12 screwed connector, axial output.

Specificaties
Kenmerk Waarde
Body Style Barrel
Thread Size M12 x 1
Output Type PNP-NO
Detection Range 6 mm
Terminal Type M12 - 4 Pin
Supply Voltage 6 → 36 V dc
Length 50mm
Width 12mm
Maximum DC Voltage 36V
Mounting Type Flush Mount
Switching Current 100 mA
IP Rating IP67
Housing Material Nickel Plated Brass
Minimum Operating Temperature -25°C
Standards Met CE, CULus Listed, EAC
Maximum Switching Frequency 1kHz
Maximum Operating Temperature +75°C
Shielding Unshielded
Reverse Polarity Protection Yes
Short Circuit Overload Protection Yes
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
47 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
62,70
(excl. BTW)
75,87
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 62,70
Related Products
RS Pro stainless steel inductive sensors offer ’Factor ...
Description:
RS Pro stainless steel inductive sensors offer ’Factor 1’ performance which enables them to sense all metals – both ferrous and non-ferrous – at the same distance offering greater sensing confidence. Stainless steel body with PBT sensing face High impact ...
Stainless steel body with PBT sensing face. Stock ...
Description:
Stainless steel body with PBT sensing face. Stock numbers 405-7072, 405-7094, 405-7101, 405-7117, 405-7123 and 405-7139 have stainless steel bodies and duroplast sensing faces providing high impact and thermal resistance3 wire dc2m PUR prewired and M12 connector versionsConnector versions supplied ...
These Pepperl + Fuchs inductive proximity sensors are ...
Description:
These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are available with an extended sensing range of up to 30mm to suit a number of different applications. LED indicationEmbeddable or flush installationIP67 Supply voltage 10 to 30VdcShort ...
PBTP sensing face material LED indicationExceeds CENELEC sensing ...
Description:
PBTP sensing face material LED indicationExceeds CENELEC sensing range for greater sensitivity and mechanical protectionStandard range is a replacement to short body and E2EG rangeOperating temperature range -40 → +70°CSupply voltage 12 to 24VdcLoad current 200mA maximumShort circuit, surge suppression ...