Omron, M12 x 1, NC Magnetic Proximity Sensor 47.1mm Length, 10 → 30 V dc supply voltage

  • RS-stocknr. 175-6911
  • Fabrikantnummer E2EQ-X7D212-T 2M
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Proximity sensors with longer sensing distance require increased sensitivity. However, with the increased sensitivity, temperature changes will have bigger influence in sensing distance. E2E NEXT Proximity Sensors use "Thermal Distance Control": long-distance and stable detection technology, newly developed by OMRON."Thermal Distance Control" with "PROX2" write temperature correction values externally when shipped and minimize the sensing distance changes due to temperature changes, which could not be done by the conventional analog IC.

With high-brightness LED the indicator is visible anywhere from 360°.
Only 10 Seconds to Replace a Proximity Sensor with the ″e-jig″ (Mounting Sleeve).
Cables with enhanced oil resistance enabled 2-year oil resistance

Specificaties
Kenmerk Waarde
Body Style Barrel
Thread Size M12 x 1
Output Type NC
Detection Range 7 mm
Terminal Type Cable
Supply Voltage 10 → 30 V dc
Length 47.1mm
Width 21mm
Maximum DC Voltage 30V
Mounting Type Flush Mount
IP Rating IP67
Switching Current 3 → 100 mA
Housing Material Brass
Maximum Operating Temperature +70°C
Maximum Switching Frequency 250Hz
Short Circuit Overload Protection Yes
Standards Met CE Certificate, CSA C22.2 No.14-13, UL 508, UL Certified
Shielding Shielded
Minimum Operating Temperature -25°C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
88,80
(excl. BTW)
107,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 88,80
Related Products
The E2K-F sensor is a flat capacitive proximity ...
Description:
The E2K-F sensor is a flat capacitive proximity sensor with a thickness of only 10mm making it ideal for places where space is limited. Heat-resistant ABS resin caseNPN open collector outputDirect mounting onto a metallic surface possibleLED indicationSurge suppressor and ...
RS Pro stainless steel inductive sensors offer ’Factor ...
Description:
RS Pro stainless steel inductive sensors offer ’Factor 1’ performance which enables them to sense all metals – both ferrous and non-ferrous – at the same distance offering greater sensing confidence. Stainless steel body with PBT sensing face High impact ...
Stainless steel body with PBT sensing face. Stock ...
Description:
Stainless steel body with PBT sensing face. Stock numbers 405-7072, 405-7094, 405-7101, 405-7117, 405-7123 and 405-7139 have stainless steel bodies and duroplast sensing faces providing high impact and thermal resistance3 wire dc2m PUR prewired and M12 connector versionsConnector versions supplied ...
The Phoenix Contact CMS P1 Plotter can be ...
Description:
The Phoenix Contact CMS P1 Plotter can be used to label sheet materials, UniCard and label strips. The integrated pen station facilitates handling and helps to prevent the pens from drying out. The CMS P1 Plotter can also be converted ...