Telemecanique Sensors PNP-NO Inductive Sensor 26mm Length, 12 → 24 V dc supply voltage , IP68 Rating

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Form C Flush/Non-Flush Mount, Plastic Case

Flat format
Flush or non flush mountable versions
LED status display
Operating temperature range -25 to +70° C
Dimensions:- Form C; 40 x 40 x 15mm

Note

Manufacturers part nos. starting with XS8 indicate teach mode.

Specificaties
Kenmerk Waarde
Body Style Block
Output Type PNP-NO
Detection Range 15 mm
Terminal Type Cable
Supply Voltage 12 → 24 V dc
Length 26mm
Width 26mm
Depth 13mm
Maximum DC Voltage 36V
Mounting Type Non Flush
IP Rating IP68
Switching Current 100 mA
Housing Material PBT
Reverse Polarity Protection Yes
Maximum Operating Temperature +70°C
Maximum Switching Frequency 2kHz
Minimum Operating Temperature -25°C
Short Circuit Overload Protection Yes
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
69,30
(excl. BTW)
83,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 69,30
Related Products
Space saving, low profile rigid aluminium die cast ...
Description:
Space saving, low profile rigid aluminium die cast housing All provided with an operation indicator Mounting front or rear of the housing Protected from water or oil splashes.
The E2Q2 rectangular proximity sensor can change the ...
Description:
The E2Q2 rectangular proximity sensor can change the sensing direction freely. Sensing direction can be changed from front to back Adjustable up, down, left and right, in 90° unitsMounts like a limit switch.
The TL-W series are standard flat inductive proximity ...
Description:
The TL-W series are standard flat inductive proximity sensors. These sensors are only 6 mm thick yet provide a sensing distance of up to 5mm. Pre wired models with 2m cableHeat resistant ABS casingProtection circuit: load short circuit protection, surge ...
The E2A3 inductive sensor from Omron is designed ...
Description:
The E2A3 inductive sensor from Omron is designed to have a longer sensing distance to its standard E2A counterpart. This range featuers and optimised sensing preformance to achieve triple the sensing distance for flush mounting requirements. The additional sensing distance ...