Baumer, M18 x 1, PNP-NO Inductive Sensor 34.5mm Length, 10 → 30 V dc supply voltage , IP67 Rating

  • RS-stocknr. 512-5520
  • Fabrikantnummer IFRM 18P17A5/L
  • Fabrikant Baumer
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Inductive detectors M18

M18 sealed inductive detectors, flush mountable.
PNP output with closure (N/O) by cable (A3 L) or M12 connector (A3 S14L) (available from the catalogue).
IP67 nickel-plated brass shell.
LED status display.
Protected against reverse polarity and short circuits.

Specificaties
Kenmerk Waarde
Body Style Barrel
Thread Size M18 x 1
Output Type PNP-NO
Detection Range 8 mm
Terminal Type Cable
Supply Voltage 10 → 30 V dc
Length 34.5mm
Width 18mm
Maximum DC Voltage 30V
Mounting Type Flush Mount
Switching Current 200 mA
IP Rating IP67
Housing Material Stainless Steel
Standards Met CE, CULus Listed, EAC
Reverse Polarity Protection Yes
Shielding Shielded
Maximum Operating Temperature +75°C
Minimum Operating Temperature -25°C
Maximum Switching Frequency 500Hz
Short Circuit Overload Protection Yes
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,90
(excl. BTW)
66,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 54,90
Related Products
Sick IMC series inductive proximity sensors offer up ...
Description:
Sick IMC series inductive proximity sensors offer up to four individual switching points or windows including the hysteresis can be set. Equipped with two freely programmable switching end stages, the IMC sensors can replace several conventional devices. Adjustable switch-on and ...
Allen Bradley 871C series miniature inductive proximity sensors ...
Description:
Allen Bradley 871C series miniature inductive proximity sensors are self-contained, solid-state devices designed to sense the presence of ferrous and non-ferrous metal objects without touching them. These small-barrel sensors are designed for space-critical applications where standard-size sensors simply will not ...
Sense all metalsNickel plated brass housing with PBT ...
Description:
Sense all metalsNickel plated brass housing with PBT sensing faceEmbeddableIP67Precise linearity and high repeatability without recalibrationLinear output current proportional to the distance between target and sensor (with an external 500Ω resistor a conversion in 0 to 10V range is possible)Operating ...
Stainless steel body with PBT sensing face. Stock ...
Description:
Stainless steel body with PBT sensing face. Stock numbers 405-7072, 405-7094, 405-7101, 405-7117, 405-7123 and 405-7139 have stainless steel bodies and duroplast sensing faces providing high impact and thermal resistance3 wire dc2m PUR prewired and M12 connector versionsConnector versions supplied ...