- RS-stocknr.:
- 837-5352
- Fabrikantnummer:
- Ni4-DS20-2AP6X2-H1141
- Fabrikant:
- Turck
- RS-stocknr.:
- 837-5352
- Fabrikantnummer:
- Ni4-DS20-2AP6X2-H1141
- Fabrikant:
- Turck
Datasheets
Wetgeving en compliance
Productomschrijving
Turck Proximity Sensor, 10 to 30V DC Operating Voltage Range, 4mm Detection Range - Ni4-DS20-2AP6X2-H1141
Use this inductive proximity sensor from Turck to keep a close eye on objects in your automated system. It generates a magnetic field through an oscillating circuit, which lets it quickly detect metal objects without any contact. This means it's protected against wear for an extended service life and minimal maintenance. A robust glass-reinforced PBT housing makes the unit just what you need for harsh environments, as it's resistant to heat and abrasion.
Features & Benefits
Flame-retardant for safety in the event of a fire
Protected against short circuits to minimise the chance of power spikes damaging equipment
LEDs let you conveniently know when its output is energised
Wide operating voltage range between 10 and 30V DC makes it compatible with various low-voltage power supplies
Protected against short circuits to minimise the chance of power spikes damaging equipment
LEDs let you conveniently know when its output is energised
Wide operating voltage range between 10 and 30V DC makes it compatible with various low-voltage power supplies
Applications
Oil and gas industries
Automotive manufacturing
Shipyards
Packaging facilities
Automotive manufacturing
Shipyards
Packaging facilities
Is this proximity sensor dustproof and waterproof?
The component has an IP67 rating, which indicates that it's dust-tight and protected against immersion in 1m of water for up to 30 minutes. This makes it a good choice for environments with high levels of dust and moisture.
Turck Banner Barrel Inductive Proximity Sensors
Inductive sensors are designed for contact-less and wear-free detection. They are the perfect solution for breweries, frozen food, dairies and packaging applications. Resistant to cleaning agents and disinfectants and exceed the protection classes IP68 & IP69K. These sensors are available as standard versions in chrome plated brass barrels or stainless steel housing with LCP front cap and double lip seal for heavy use or sudden changes in temperature. All inductive sensors of the new uprox+ generation operate with highest switching distances, feature an extended temperature range and are easily mounted.Turck inductive proximity sensors are manufactured with shielded coil, designated by Bi in the part number, and a non-shielded coil, designated by Ni in the part number.
Specificaties
Kenmerk | Waarde |
---|---|
Sensor Technology | Inductive |
Body Style | Block |
Output Type | PNP |
Detection Range | 4 mm |
Terminal Type | 4-Pin M12 Connector |
Supply Voltage | 10 → 30 V dc |
IP Rating | IP67 |
Length | 52mm |
Width | 20mm |
Switching Frequency | 50 Hz |
Depth | 45mm |
Maximum DC Voltage | 30V |
Mounting Type | Non-Flush |
Switching Current | 200 mA |
Maximum Operating Temperature | +70°C |
Maximum Switching Frequency | 1kHz |
Shielding | Shielded |
Housing Material | PBT, Plastic |
Minimum Operating Temperature | -25°C |
Short Circuit Overload Protection | Yes |
Reverse Polarity Protection | Yes |