BALLUFF Inductive Block-Style Proximity Sensor, 7 mm Detection, PNP Output, 10 → 30 V dc, IP67
- RS-stocknr.:
- 902-7366
- Fabrikantnummer:
- BES R01ZC-PAC70B-BP00.2-GS04
- Fabrikant:
- BALLUFF
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 149,32
(excl. BTW)
€ 180,68
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 149,32 |
- RS-stocknr.:
- 902-7366
- Fabrikantnummer:
- BES R01ZC-PAC70B-BP00.2-GS04
- Fabrikant:
- BALLUFF
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
BES 3 / 4 Wire Inductive Block Sensors
This range of block inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications within industrial environments.
Pre cabled or connector
Flush shielded or non-flush unshielded
3 & 4 wire DC configuration
Flush shielded or non-flush unshielded
3 & 4 wire DC configuration
Specificaties
Kenmerk | Waarde |
|---|---|
| Body Style | Block |
| Sensor Technology | Inductive |
| Output Type | PNP |
| Detection Range | 7 mm |
| Terminal Type | 4-Pin M12 Connector |
| Supply Voltage | 10 → 30 V dc |
| IP Rating | IP67 |
| Length | 20mm |
| Width | 32mm |
| Depth | 8mm |
| Maximum DC Voltage | 30V |
| Mounting Type | Flush |
| Switching Current | 200 mA |
| Maximum Operating Temperature | +70°C |
| Housing Material | Cast Zinc |
| Shielding | Partial |
| Maximum Switching Frequency | 150Hz |
| Reverse Polarity Protection | Yes |
| Minimum Operating Temperature | -25°C |
| Short Circuit Overload Protection | Yes |
| Standards Met | CE, cULus, IEC 60947-5-2 |