ITT Cannon Neptune Circular Series Panel Mount Housing, 19 Pole Socket, For Use With Male Contacts

  • RS-stocknr. 274-3226
  • Fabrikantnummer 192900-0353/TN7S16-0019P1L
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Panel Plug and Socket Shells, Jam Nut Fixing

Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.

//media.rs-online.com/t_line/L273537-21.gif

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Specificaties
Kenmerk Waarde
Number of Contacts 19
Plug/Socket Socket
Mounting Type Panel Mount
Termination Method Crimp
Contact Gender Male
Body Orientation Straight
Series Neptune Circular
Housing Material Polyamide
943 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
17,24
(excl. BTW)
20,86
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 17,24
20 - 39
€ 15,51
40 +
€ 13,97
Related Products
From ITT Cannon, a selection of panel mount ...
Description:
From ITT Cannon, a selection of panel mount receptacles from the Trident Ringlock series. The rugged threaded connectors are ideal for industrial, transportation and process control applications. Featuring a metal bayonet coupling mechanism, the connectors can be mated and unmated ...
Dust caps stock no. 235-420 (typical of range) ...
Description:
Dust caps stock no. 235-420 (typical of range) are suitable for use with the chassis mount receptacles. RF shielding inherent in the full metal constructionBackshells enable cable braid termination so meeting EMC requirementsSignal versions have the same planform & contact ...
From ITT Cannon, the Trident connector system is ...
Description:
From ITT Cannon, the Trident connector system is designed for use in harsh environments. With membrane wire seals and a strong metal coupling ring, this connector is ideal for use in outdoor electronics and automobile applications.
From ITT Cannon, these SURE-SEAL chassis connectors are ...
Description:
From ITT Cannon, these SURE-SEAL chassis connectors are simple to use, featuring a single-piece moulded body that requires no other parts other than the necessary contacts, which are sold separately. With an excellent level of ingress protection, these SURE-SEAL connectors ...