Phoenix Contact SACC-M12FS-5CON-DM 5-8 SH VA Series M12 Female Cable Mount Connector, 5 contacts Socket

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Phoenix Contact A-Coded M12 Shielded Connectors, Stainless Steel

Pheonix Contact 5 way A-coded M12 shielded sensor/actuator plug and socket connectors in high grade corrosion resistant stainless steel, designed to meet the requirements of applications that have demanding environments, 360 degree shielding in environments with electromagnetic interference. These plug and socket connectors are IP Rated to IP69K, with a current and voltage rating of 4A at 60V and with an external cable capacity of 5.5 to 8.6mm.

IP69K Rated
Operating temperature range -40 to +85 °C
Over 100 mating cycles
Screw terminal wire connection for built in contacts

Standards

IEC 61076-2-101

Approvals

GOST

Phoenix Contact M12 Connectors

A comprehensive range of Phoenix Contact M12 connector designed for use within demanding environments, with a variety of fittings for enhanced corrosion resistance and durability.

Specificaties
Kenmerk Waarde
Number of Contacts 5
Plug/Socket Socket
Mounting Type Cable Mount
Connector Size M12
Termination Method Screw
Shell Size M12
Current Rating 4A
IP Rating IP65, IP67, IP69K
Contact Gender Female
Voltage Rating 60 V
Mating Type A Coded
Body Orientation Straight
Series SACC-M12FS-5CON-DM 5-8 SH VA
Housing Material Stainless Steel
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 31-12-2019, met een levertijd van 1 werkdag.
Prijs Each
114,83
(excl. BTW)
138,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 114,83
5 +
€ 111,38
Related Products
Han M23 HBM front 3,2mm. Size M23High contact ...
Description:
Han M23 HBM front 3,2mm. Size M23High contact densityRobust hoods and housings for industrial applicationsAssembly requires no toolsGood EMC properties6 to 19 contacts Crimp, solder and PCB solder connections.
From ITT Cannon, the Trident connector system is ...
Description:
From ITT Cannon, the Trident connector system is designed for use in harsh environments. With membrane wire seals and a strong metal coupling ring, this connector is ideal for use in outdoor electronics and automobile applications.
The panel mount dimensions are such that mounting ...
Description:
The panel mount dimensions are such that mounting interchangeability is possible with MIL-C-5015 connector sizes (see Compatibility table). The plugs may be front or rear mounted, with a maximum of 4mm panel thickness. Contacts are rear insert, and are held ...
Mounted from the rear of a panel via ...
Description:
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.