xPico Device Server Module w Encryption

  • RS-stocknr. 783-2740
  • Fabrikantnummer XPC100100B-01
  • Fabrikant Lantronix
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

xPico Ethernet Embedded Device Server

xPico is an extremely compact System-on-Module that provides 10Base-T or 100Base-TX Ethernet connectivity on virtually any device with a UART serial interface. The included industry-proven Lantronix device server application and full IP stack allow seamless remote access to device data simplifying design integration while providing robust connectivity. A key feature of the xPico is that there is virtually no need to write a single line of code, translating to a much lower development cost and faster time-to-market.

XPC100100B-01 xPico Ethernet Module (RS Part No. 783-2740)
Ethernet 10Base-T or 100Base-TX (Auto-sensing)
Protocols: TCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP
SNMP, Telnet, Serial, Internal Web Server, and Microsoft Windows-based utility for web configuration
Security: 256-bit AES Encryption
Internal Web Server: Storage Capacity: 384KB for Web Pages
Based on the DSTni-EX Enhanced 16-bit x86 architecture with 512KB Flash memory, 256KB SRAM
Firmware upgradeable via TFTP and Serial Port
Host communication: serial UART with RTS/CTS flow control
Data Rate: 300bps to 921.6kbps
8 x GPIO pins
Power supply: +3.3Vdc
Operating temperature range: -40 to +85°C
Package format: SMT
Dimensions: 24 x 16.5 x 5.64mm
Included Software: MS Windows-based DeviceInstaller, Com Port Redirector

XPC100100K-02 xPico Ethernet Development Kit (RS Part No. 783-2744)
XPC100100B-01 xPico Ethernet Module
DE9 serial port connector for RS-232/422/485 communication
DE9 serial port connector for RS-232 communication
RJ45 Ethernet connector and PoE port
miniUSB socket with UART-USB Bridge
On-board Power-over-Ethernet (PoE) regulator
System and Ethernet status LEDs
Header for access to all logic xPico pins
Reset pushbutton
Set Default pushbutton
Power switch
Powered from USB or Ethernet connection

Supplied with

Development kit includes: 3m RS-232 null-modem cable, 3m CAT5 Ethernet cable

Specificaties
Kenmerk Waarde
Dimensions 16.5 x 24 x 5.64mm
Height 5.64mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 16.5mm
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
24,63
(excl. BTW)
29,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,63
5 +
€ 23,64
Related Products
10M Ethernet 10Base-T/2converter RJ-45 connector for UTP interfaceInterface ...
Description:
10M Ethernet 10Base-T/2converter RJ-45 connector for UTP interfaceInterface Connector 1* RJ-45 Jack from (Hub/station) select switch, 1* BNC socket to 10 Base-2 Maximum cable Length UTP: 100m Coaxial: 185m per segment Data Transfer Rate: 10Mbps LED Indicator: Col, Link/RCV, Power, ...
Suitable for the EA-PS 3000B and EA-PS 9000 ...
Description:
Suitable for the EA-PS 3000B and EA-PS 9000 seriesEasy to install – Plug&PlayNo external power supply requiredSeparate settings for current and voltageActual values for current and voltage can be recorded separatelyStatus signals can be recorded separatelyControl signalsEvaluation and graphical display ...
Lantronix XPort Pro is an embedded Ethernet networking ...
Description:
Lantronix XPort Pro is an embedded Ethernet networking module designed to enable M2M edge computing and effortlessly handle demanding applications with the power of an advanced architecture 32-bit processor. Built into an extended RJ45 PCB mounting socket, it provides an ...
Lantronix XPort Pro is an embedded Ethernet networking ...
Description:
Lantronix XPort Pro is an embedded Ethernet networking module designed to enable M2M edge computing and effortlessly handle demanding applications with the power of an advanced architecture 32-bit processor. Built into an extended RJ45 PCB mounting socket, it provides an ...