Bulgin 10A Inline Fuse Holder for 5 x 20mm Fuse, 250V

  • RS-stocknr. 414-601
  • Fabrikantnummer FX0380
  • Fabrikant Bulgin
Wetgeving en compliance
Land van herkomst: TN

Bulgin In-Line Fuse Holders - PC1

From Bulgin, the FX0 series of In-line fuse holders designed for housing 5x20 mm, 6.3x25 and 6.3x32 mm cartridge fuses. The fully enclosed holders are robust and reliable, and with their two-part construction are simple to install. In-line fuse holders make it easier to access or change fuses in an electrical circuit as and when required.

Manufactured from high-quality materials the FX0 fuse holders feature brass nickel plated screw terminals requiring no specialized tooling. This makes termination easy and repair rapid. Available in two types, standard enclosed or sealed to IP66. FX0 fuse holders are ideal for industrial applications where a higher level of protection is needed. Suitable for maintenance, repair or for new designs.

Protection Category PC1

The Bulgin FX0 series of in-line fuse holders have a PC1 rating. This means the fuse holders offer no integral protection against electric shock. Designers and manufacturers MUST provide additional protection against electric shock on equipment.

Features and Benefits

• Robust and reliable
• Compact design
• Fully enclosed clear Polybutene UL94HB or black Nylon 6 UL94V-0 plastic casings
• Convenient two-part construction, screws together
• IP66 versions to Protection Class to EN60529: 1992+A2:2013
• PVC Grommet and Nitrile O Ring on the Sealed IP66 Versions
• 10 Amp maximum
• 50 Volt (250 Volt inaccessible)
• Accepts 1mm² cable size maximum


Cartridge fuses and in-line fuse holders are used to protect a circuits cabling from the excessive current that could lead to damage or even an electrical fire. In-line fuse holders are used in a wide range of electrical and electronic applications. Some of the most common are

• Electrical appliances and devices
• Portable electronics
• LCD Monitors
• DVD players
• Game systems
• Laptops
• Printers
• Battery packs

Fuse Holder Types – Standard or Sealed?

• Part numbers FX0380, FX0280 and FX0180 standard fuse holders.
• Part numbers FX0385, FX0285 and FX0185 are sealed to IP66. These fuse holders are supplied with a 3 stage stepped cable grommet. The stepped grommet allows the fuse holder to maintain its IP66 rating depending on the wire size needed.

Kenmerk Waarde
Fuse Size 5 x 20mm
Current Rating 10A
Voltage Rating 250V
Protection Category PC1
Body Material Nylon, Polybutene
1565 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9645 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 3,884
€ 19,42
25 - 95
€ 3,652
€ 18,26
100 - 495
€ 3,416
€ 17,08
500 - 995
€ 3,184
€ 15,92
1000 +
€ 2,874
€ 14,37
Related Products
Bulgin base mount fuseholders are designed to give ...
Bulgin base mount fuseholders are designed to give the degree of protection demanded in today’s sophisticated electronic equipment. These fuseholders carry are manufactured from high grade flame retardant nylon and polyester materials. Bulgin base mount fuseholders feature protection against shock ...
The Schurter 231549P series 16A panel mount fuse ...
The Schurter 231549P series 16A panel mount fuse holder offers current and voltage ratings of 16A and 250VAC respectively. This makes it ideal to use in harsh environments. It has power dissipation of 3.4W. The body of this holder is ...
One complete fuse holder body system requires one ...
One complete fuse holder body system requires one holder body and one cap of the appropriate size.,Maximum current 10A @ 250V (6·3x32mm), 6·3A @ 250V (5x20mm). Protection to PC2Polyamide Body, depth behind panel 42mm.
Voltage Rating 250V. For 5 x 20 mm ...
Voltage Rating 250V. For 5 x 20 mm fusesFully touchproof contacts BS3042 standard testMoulded bayonet fit for positive locking action The PCB pins (1x 0.5x4.3 long) are on 10mm pitchBody and nylon caps UL94-VO rated.