Microchip Technology MEC1704Q-C2-I/SZ, IO Controller, PCI, ACPI, DMA, 144-Pin WFBGA

  • RS-stocknr. 177-4114
  • Fabrikantnummer MEC1704Q-C2-I/SZ
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The MEC1704 is customized for embedded and industrial computing platforms. It is available in extended temperature range of -40oC to +85oC and has 2 The MEC170x is a family of keyboard and embedded controller designs customized for notebooks and industrial computing platforms. The family is a highly-configurable, mixed signal, advanced I/O controller architecture.

ARM® Cortex®-M4F Processor Core
Complete ARM-Standard Debug Support
Comprehensive ARM-Standard Trace Support
Internal Memory: up to 480KB of SRAM
Enhanced Serial Peripheral Interface (eSPI)
Supports LPC Bus frequencies of 19MHz to 33MHz
Four EC-based SMBus 2.0 Host Controllers
Five independent Hardware Driven PS/2 Ports
One Quad Serial Peripheral Interface (SPI) Controller
18 x 8 Interrupt Capable Multiplexed Keyboard Scan Matrix
Four Breathing/Blinking LED Interfaces
Multi-purpose AES Cryptographic Engine: Hardware support for ECB, CTR, CBC and OFB AES modes

Specificaties
Kenmerk Waarde
PCI Support Yes
ACPI Power Management Yes
DMA Controller Yes
Mounting Type Surface Mount
Package Type WFBGA
Pin Count 144
Dimensions 9.15 x 9.15 x 0.53mm
Height 0.53mm
Length 9.15mm
Maximum Operating Supply Voltage 3.46 V
Maximum Operating Temperature +85 °C
Width 9.15mm
Minimum Operating Supply Voltage 1.71 V
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 260)
4,144
(excl. BTW)
5,014
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
260 +
€ 4,144
€ 1.077,44
*prijsindicatie
Related Products
The MCP25625 is a complete, cost-effective and small-footprint ...
Description:
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters ...
The LTC®2875 is a robust high speed, low ...
Description:
The LTC®2875 is a robust high speed, low power CAN transceiver operating on 3.3V or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...