Insertion & Extraction Combination Tool size 20

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: US
Productomschrijving

The TE Connectivity 543382-8 is an insertion/extraction tip for the 91285-1 tool (446-822). This replacement tip is for HD-22 contacts with a wire size of 28-22 AWG. It is colour coded with a green dot which relates to the type and wire size.
The 543382-8 tip can be used for both insertion and extraction of crimp contacts, allowing you to easily insert or extract a terminal from a housing, without causing any damage. With a combination of both functions, you don’t have to worry about changing the tip type for the different operations, saving you valuable time.
The 543382-8 tip, when used with the extraction tool, can insert and extract HD-20 contacts from the AMPLIMITE High Density range of connector contacts. There are other tips available for the HD-22 series.

• Insertion and extraction
• Compatible contacts: HD-22
• Wire size: 28-22 AWG
• High quality

How to replace the tip:
To replace an insertion and extraction tip, you will need to firstly remove the old tip using the hex wrench provided with the tool. Insert the plug into the wide end of the tip and place it into the tool handle. The handle comes with a hex wrench which tightens and secures the tip into the handle. Then you’re ready to go.

Replacement Tips:
(782-1182) 543382-5 : HD-20 28-20AWG
(782-6317) - 1-543382-1 : HD-20 28-24AWG
(782-6329) - 543382-8 : HD-22 28-22AWG

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Contact Size 20
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
25 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
28,88
(excl. BTW)
34,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 28,88
25 - 74
€ 24,87
75 - 199
€ 23,28
200 - 399
€ 22,47
400 +
€ 21,35
Related Products
The Molex Handtool series crimp extraction tool is ...
Description:
The Molex Handtool series crimp extraction tool is an innovative device mainly used for the removal of pin and socket terminals from sealed plug and receptacle assemblies. It is mainly used for circular contacts. A full cycle ratcheting hand tool ...
Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 ...
Description:
Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1.2 mm Mated Height. A Low mated height of 0.94 or 1.2 mm (maximum of 1.0 or 1.3 mm)Minimal mounting area requiredUltra lightweightHigh frequency transmissionAutomatic board placementThe use of ultra - ...
All planforms require crimp contacts with the exception ...
Description:
All planforms require crimp contacts with the exception of the 5 +PE configuration which is supplied complete with screw termination contacts.Bayonet locking, robust, lightweight plastic connectors suited for machinery, light and sound applications and where power and control are required ...
All planforms require crimp contacts with the exception ...
Description:
All planforms require crimp contacts with the exception of the 5 +PE configuration which is supplied complete with screw termination contacts.Bayonet locking, robust, lightweight plastic connectors suited for machinery, light and sound applications and where power and control are required ...