Insertion & Extraction Combination Tool, 6417 Series

  • RS-stocknr. 813-5814
  • Fabrikantnummer 6417 2 055-01
  • Fabrikant COMMSCOPE
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

TE Connectivity LSA-Plus and LSA-Profil Connection Modules and Tool

A range of TE Connectivity LSA-Plus and LSA-Profil Connection and Disconnection Modules.

The Insertion and Extraction Tool, stock number 813-5814 , is fitted with a sensor which trims excess cable when a termination has been completed. The conductor diameter range of the LSA+ Insertion Tool is 0.35 to 2.6 mm with an outside diameter range of 0.7 to 2.6 mm. The LSA-Plus Insertion Tool also includes a cutting inhibitor clip, extraction hook and module removal blade.

Special Features:

813-5845 LSA-PLUS disconnection module with 6 off 3 wire shielded pairs
813-5836 LSA-PLUS disconnection module with screw terminals for wires up to 2.5 mm²
813-5848 LSA-PLUS disconnection module has numbering 0 to 9
813-5810 LSA-PROFIL disconnection module has numbering 0 to 9
813-5858 LSA-PROFIL switching module printed jumper side 1...0

Technical Specifications
Thread dimensions: Rigid thread a): Ø 0.4-0.8 mm b)
  Isolation: Ø 0.7-1.5 mm, PVC and PE
No. of threads per contact: 2 max. (with identical dimensions) c)
Insulation resistance: ≥ 5 ´ 104
Test voltage: ≥ 2kV
Surge voltages: As VDE 0433
Contact resistance: Typical 1 mΩ
Constant current: Determined by the thread max.
  allowed current
Surge current: Disconnections modules: 5As 5kA 8//20 μs
  Contact stud bars: 10As 10kA 8//20 μs
a) certain kinds of soft thread can be used.
b) After use of thread larger than Ø 0.65 mm only
  that later on thinner thread is not used.
c) Thread dimensions: Ø 0.4 - 0.65 mm.
Specificaties
Kenmerk Waarde
Series 6417
Series Number 6417 2 055-01
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
75,93
(excl. BTW)
91,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 75,93
50 - 99
€ 69,06
100 +
€ 61,38
Related Products
A quality hand crimping tool for crimping turned ...
Description:
A quality hand crimping tool for crimping turned D-sub male and female coaxial inner contacts and signal contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This ...
All planforms require crimp contacts with the exception ...
Description:
All planforms require crimp contacts with the exception of the 5 +PE configuration which is supplied complete with screw termination contacts.Bayonet locking, robust, lightweight plastic connectors suited for machinery, light and sound applications and where power and control are required ...
These RS PRO, professional Plier Crimping Tool for ...
Description:
These RS PRO, professional Plier Crimping Tool for IDC connectors has been designed with professionals in mind and manufactured from high-quality materials. Frame made from high-quality steel guarantee durability and long life operation. Ergonomically designed and cushioned handles offer safety ...
AMPLIMITE HDF-20 series low profile IDC All-Plastic d-sub ...
Description:
AMPLIMITE HDF-20 series low profile IDC All-Plastic d-sub connectors for round conductor flat ribbon cable. These AMPLIMITE HDF-20 series IDC All-Plastic d-sub ribbon cable connectors have pre-assembled black 94V-0 rated thermoplastic housings and covers, standard 3.05mm mounting holes and are ...