MAX4208AUA+ Maxim, Instrumentation Amplifier, 0.02mV Offset 750kHz, R-RO, 2.85 → 5.5 V, 8-Pin μMAX

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Instrumentation Amplifiers, Maxim Integrated

The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Instrumentation Amplifiers, Maxim Integrated

Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.

Specificaties
Kenmerk Waarde
Power Supply Type Dual, Single
Package Type μMAX
Mounting Type Surface Mount
Typical Single Supply Voltage 2.85 → 5.5 V
Pin Count 8
Typical Dual Supply Voltage ±1.425 → ±2.75V
Rail to Rail Rail to Rail Output
Maximum Input Offset Voltage 0.02mV
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Maximum Input Resistance 2GΩ
Minimum CMRR 106dB
Typical Gain Bandwidth Product 750kHz
Maximum Supply Current 3 mA
Height 0.95mm
Length 3.1mm
Dimensions 3.1 x 3.1 x 0.95mm
Width 3.1mm
39 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,33
(excl. BTW)
2,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 2,33
10 +
€ 2,22
Verpakkingsopties
Related Products
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, ...
Description:
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, T-, S-, R-, and E-Type0.25°C ResolutionDetects Thermocouple Shorts to GND or VCCDetects Open ThermocoupleInterfaces with simple SPI-Compatible Serial Interface (Read-Only) to Microcontrollers.
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...
The operational amplifiers have low input offset voltage ...
Description:
The operational amplifiers have low input offset voltage and drift. They are ideal for power-sensitive sensor interface applications where precision and low-noise performance enable the input voltage to scale.