Megger MIT320, Insulation & Continuity Tester, 1000V dc, 999mΩ, CAT III 600V UKAS Calibration

  • RS-stocknr. 516-9198
  • Fabrikantnummer MIT320
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

MIT 300 Series Insulation & Continuity Testers

A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing.

20mm LCD display with true analogue response
Tough rubber armoured case with self contained display cover that locks away underneath the instrument during use
Designed to hang comfortably around the neck for hands-free, or for bench use
Automatic 200mA fast continuity test on connection to the circuit
Lead resistance nulling on continuity allows for use of fused test probes
Automatic discharge of circuit under test
Safety input terminal interlock - prevents unsafe connection of test leads
Intelligent Safety System - even if connected to a live circuit whilst on continuity setting the tester will remain safe and undamaged
Live voltage warning alerts the operator when a circuit voltage over 25V exists when insulation testing
Safety lockout prevents the test from operating when the circuit voltage is > 50V
Continuity check - prevents a continuity test or buzzer test on a live circuit
3 phase safe - will not be damaged if connected across phases
Locking test button
Meets the requirement of BS EN 61010-1 for safe connection to a 440V Installation Category III supply (600V Phase to Earth)
IP54

MIT310A

Moving coil display

MIT320 benefits from the following additional features:

Backlit display and range selection ideal for low light environment
Selectable insulation alarm limit for fast go - no go testing
Selectable continuity alarm limit for fast go - no go testing
Resistance measurement range to 1 MΩ
SP3 switched probe supplied for one handed operation
SP1000 illuminated switched probe with ultra-bright LED light available separately

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

instructions, 2 wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap & carry case.

Specificaties
Kenmerk Waarde
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999mΩ
Display Type LCD
Calibrated UKAS
Test Current 1mA
Battery Life 5000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 600V
Safety Category CAT III 600V
Battery Type AA
Plug Type Type G - British 3-pin
Weight 980g
Model Number p MIT320
Dimensions 203 x 148 x 78mm
Length 203mm
Width 148mm
Height 78mm
21 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
708,00
(excl. BTW)
856,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 708,00
Related Products
The Fluke combinational product consist of a 320 ...
Description:
The Fluke combinational product consist of a 320 series clamp meter and voltage and continuity tester. The clamp meters are designed to perform in the toughest environments and provide noise-free and reliable results and voltage and continuity testers having rugged ...
Component testing tweezers from RS PRO are an ...
Description:
Component testing tweezers from RS PRO are an excellent tool ideal for testing various types of SMD (service mounting device) electrical components. The RS PRO testing tweezers feature an automatic DCV or ACV selection, capacitance, resistance, continuity and diode selection, ...
TEK 402/404 are compact, versatile, battery powered instruments ...
Description:
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB ...
TEK 402/404 are compact, versatile, battery powered instruments ...
Description:
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB ...