Megger MIT220, Insulation Tester 999MΩ CAT III 300 V RS Calibration

  • RS-stocknr. 535-6465
  • Fabrikantnummer MIT220
  • Warranty 3 jaar
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

MIT220 Insulation & Continuity Tester

The MIT200 is one of the smallest insulation testers available on the market today. With options of a two voltage tester to a three voltage instrument, the MIT200 instruments offer a range of safety and operation features.

Insulation testing to 1000MΩ
Dual & triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition & to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200mA down to 0.01ohms resolution
Automatic discharge of circuit under test
1mA test current at selected voltage range
Default voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25V
Autoranging analogue arc scale shows only the scale in use
Live circuit warning above 25V, also inhibits insulation & continuity tests above 50V
Lead resistance compensation on continuity
Hands free continuity testing Auto power-down after 5 minutes
Complies with IEC 1010-1 safety standard installation Category III, 600V phase to earth
Conforms to EN61557-1
Tests to BS7671, 713-02, 713-03, 713-04, 713-06, 713-08, 413-04-04

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

6 x AA alkaline batteries, test leads crocodile clips, carry case & instructions.

Megger Insulation and Continuity Tester

The Megger 1000Mohm insulation and continuity tester incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.Supplied with6 x AA alkaline batteries, test leads crocodile clips, carry case and instructions.

Features and Benefits

250V to 500V test voltage Dual and triple test voltages models Digital display with electronic analogue arc display helps to confirm insulation condition and to monitor fluctuating readings not apparent on the digital display Continuity testing at 200mA down to 0.01ohm resolution Automatic discharge of circuit under test 1mA test current at selected voltage range Default voltmeter automatically switches on when the instrument is connected to a circuit with an AC or DC voltage greater than 25V Auto ranging analogue arc scale shows only the scale in use Live circuit warning above 25V, also inhibits insulation and continuity tests above 50V Lead resistance compensation on continuity Hands free continuity testing auto power down after 5 minutes Operating temperature ranges between -10°C and 55°C

Applications

Domestic sites Commercial sites Industrial sites

Certifications

BS7671 BS76713-02 BS76713-03 BS76713-04 BS76713-06 BS76713-08 BS76413-04-04 EN61557-1 IEC 1010-1 IP40 rated

Warning

  • When measuring voltages, the use of fused test leads is recommended for personal safety.
Specificaties
Kenmerk Waarde
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V dc
Maximum Test Voltage 500V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Calibrated RSCAL
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300 V
Height 40mm
Dimensions 195 x 98 x 40mm
Battery Type AA
Weight 530g
Width 98mm
Length 195mm
Model Number p MIT220
21 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
470,40
(excl. BTW)
569,18
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 470,40
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 ...
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, PRO-Schuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, Universal Carrying Pouch F2010 Z700G, Battery Pack Master Z502H and charger Z502R. Measurement of RLO, ZL-PE, ZL-N, RINS, RE, ΔU, phasesequence and voltageOFFSET Management RL-PE / RN-PE ...
The PROFITEST INTRO provides professional electricians with a ...
Description:
The PROFITEST INTRO provides professional electricians with a universal, compact and rugged, state-of-the-art measuring tool. The MT520T test instrument is capable of executing all measurements for testing the effectiveness of safety measures in electrical systems as required by IEC 60364-6 ...