Megger MIT230, Insulation Tester 999MΩ CAT III 300 V RS Calibration

  • RS-stocknr. 535-6487
  • Fabrikantnummer MIT230
  • Warranty 3 jaar
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

MIT230 Insulation & Continuity Tester

The MIT230 incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.

Features & Benefits

Insulation testing to 1000 MΩ
Dual & triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition & to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200 mA down to 0.01 Ω resolution
Automatic discharge of circuit under test
1 mA test current at selected voltage range
Default voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25 V
Auto-ranging analogue arc scale shows only the scale in use
Live circuit warning above 25 V, also inhibits insulation & continuity tests above 50 V
Lead resistance compensation on continuity
Hands free continuity testing Auto power-down after 5 min
Complies with IEC 1010-1 safety standard installation Category III, 600 V phase to earth
Conforms to EN61557-1
Tests to BS7671, 713-02, 713-03, 713-04, 713-06, 713-08, 413-04-04

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

6 x AA alkaline batteries, test leads, crocodile clips, carry case, instructions

Warning

  • When measuring voltages, the use of fused test leads is recommended for personal safety.
Specificaties
Kenmerk Waarde
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V dc
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Calibrated RSCAL
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300 V
Battery Type AA
Dimensions 195 x 98 x 40mm
Model Number p MIT230
Width 98mm
Height 40mm
Length 195mm
Weight 530g
33 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
549,05
(excl. BTW)
664,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 549,05
Related Products
Our RS Pro insulation testers are a must-have ...
Description:
Our RS Pro insulation testers are a must-have to any electrician’s kit. They have multiple features that make them powerful tools. This insulation meter is compact, very robust and features a shockproof housing to ensure prolonged life. Our rugged insulation ...
Digital/analogue display with backlightingSelect the testing voltage for ...
Description:
Digital/analogue display with backlightingSelect the testing voltage for a variety of applicationsAutomatic dischargeSensor head with extra activation buttonDetects live switchesAdjustable threshold alarm (good/poor testing)Auto power off functionSafety: CAT III 600VProtection rating: IP54.
High voltage insulation tester ideal for testing high ...
Description:
High voltage insulation tester ideal for testing high voltage equipment including switchgear, motors, generators and cables. Meets requirements of IEEE 43-2000 Capacitance and leakage current measurement Resistance measurements up to 2TΩ (Fluke 1555)Ramp function for breakdown testingVoltage breakdown detection ...
Robust and reliable testers for high performance in ...
Description:
Robust and reliable testers for high performance in the real-world. The new MIT series: MIT515, MIT525, MIT1025 are designed for industrial and power distribution applications.The New MIT 515 (763-9267) instrument can be used to perform both simple Go No-Go insulation ...