FTDI Chip, 5 V TTL USB to UART Evaluation Board, TTL-232R-5V-PCB

  • RS-stocknr. 429-278
  • Fabrikantnummer TTL-232R-5V-PCB
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FTDI Chip USB To UART Evaluation Board

The FTDI Chip USB to UART evaluation board is a USB to TTL serial UART converter PCB, incorporating FTDI’s FT232RQ USB to serial UART interface IC device that handles all the USB signalling and protocols. This PCB provides a fast and simple way to connect devices with a TTL level serial interface to USB. It supports 5V UART signalling and has 5V or 75mA power output.

Features and Benefits

Connects directly to a microcontroller UART or I/O pins
Data transfer rates from 300 baud to 3Mbaud at TTL levels
Internal EEPROM with user writeable area
Support for FT232R FTDI Chip-ID feature for improved security
PCB is USB powered, no external supply required
Low USB bandwidth consumption
UHCI/OHCI/EHCI host controller compatible
USB 2.0 full speed compatible

Applications

USB to serial TTL level converter
Upgrading legacy peripherals to USB
Interface microcontroller UART or I/O to USB
Interface FPGA/PLD to USB
USB instrumentation PC interface
USB industrial control
USB software/hardware encryption dongles

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Interface Function USB to UART
Kit Classification Evaluation Board
Kit Name 5 V TTL
70 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
207 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,24
(excl. BTW)
17,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 14,24
10 - 19
€ 12,20
20 - 49
€ 12,06
50 - 99
€ 11,90
100 +
€ 11,69
Related Products
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interfaceEntire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed compatibleFT245R ...
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...