ON Semiconductor Evaluation Board, NCN5150SOICGEVB

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

NCN5150SOICGEVB - M-BUS Transceiver Evaluation Board, ON Semiconductor

The ON Semiconductor NCN5150SOICGEVB evaluation board features the NCN5150 (RS 796-1198) M-BUS transceiver in an SOIC package. The board includes all components needed for operating and demonstrating this device.

The NCN5150 is an integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. It includes a programmable power level of up to 2 unit loads which are available for use in external circuits through a 3.3 V LDO regulator. It can provide communication up to the maximum M-BUS communication speed of 38400 Bd (half-duplex).

Single-chip MBUS Transceiver
Up to 38400 Bd UART Communication Speeds
Integrated 3.3 V VDD LDO Regulator with Extended Peak Current
Adjustable I/O Levels
Low Bus Voltage Operation
Polarity Independent
Power-Fail Function

M-Bus (Meter-Bus) is a European standard (EN 13757-2 physical and link layer, EN 13757-3 application layer) for the remote reading of gas or electricity meters.

Specificaties
Kenmerk Waarde
Kit Classification Evaluation Board
4 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
59,72
(excl. BTW)
72,26
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 59,72
Related Products
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The MikroElektronika RS232 2 click board performs full ...
Description:
The MikroElektronika RS232 2 click board performs full RS232 to Universal Asynchronous Receiver-Transmitter (UART) signal conversion. The MIKROE-2897 click features an On-board Surface Mount Device (SMD) jumper that allows selection of power supply voltage between 3.3V and 5V. This click ...
The MikroElektronika MIKROE-2549 Opto Encoder Click is a ...
Description:
The MikroElektronika MIKROE-2549 Opto Encoder Click is a linear incremental optical sensor/encoder click, which can be used for the movement or rotation encoding. Encoders of this type are widely used for many applications which involve precise detection of the position, ...
L6362A IO-Link device transceiver main characteristics:IO-Link PHY layerDedicated ...
Description:
L6362A IO-Link device transceiver main characteristics:IO-Link PHY layerDedicated overload diagnostics pinUART interfaceSelectable 12 mA 3.3 V or 10 mA 5.0 V linear regulatorOverload and overheating protections with non-dissipative cut-off functionFull reverse polarity on IO-Link interface pinsEMC protections ...