Cypress Semiconductor, FX3 SuperSpeed USB Development Kit, CYUSB3KIT-003

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Cypress Semiconductor USB Development Kit

The Cypress Semiconductor USB development kit is a super speed USB 3.3 peripheral controller providing integrated and flexible features. It has a fully configurable, parallel, a general programmable interface called GPIF II, which can connect to any processor, ASIC or FPGA. It provides easy and glueless connectivity to popular interfaces such as asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces and parallels ATA. It has an integrated USB 3.1 Gen 1 and USB 2.0 physical layers (PHYs) along with a 32-bit ARM926EJ-S microprocessor for powerful data processing and for building custom applications. It implements an architecture that enables 375MBps data transfer from GPIF II to the USB interface.
Kit Contents:
FX3 Development board
USB 3.0 Type-A to Type-B cable
Quick start guide
Jumpers (4)

Features and Benefits

• Full USB 3.0 peripheral controller with a built-in PHY
• ARM9 with 512KB RAM for data processing gives high performance
• I2S, SPI and UART peripherals for connectivity
• Low 1.2V core and independent power domains
• Selectable XTAL input from 19.2, 26, 38.4 and 52MHz
• 32 configurable endpoints
• Operating temperature ranges between -40°C and 85°C

Applications

• Digital video camcorders
• Digital still cameras
• Printers
• Scanners
• Video capture cards
• Test and measurement equipment
• Surveillance cameras
• Personal navigation devices
• Medical imaging devices
• Video IP phones
• Portable media players
• Industrial cameras
• Data loggers
• Data acquisition
• High-performance human interface devices

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

USB (Universal Serial Bus), Cypress Semiconductor

USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals. There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts.

Specificaties
Kenmerk Waarde
Interface Function USB
Kit Classification Development Kit
Kit Name FX3 SuperSpeed
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-04-2020, met een levertijd van 1 werkdag.
Prijs Each
42,47
(excl. BTW)
51,39
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 42,47
Related Products
Internal opto-isolator circuitry electrically isolates the development kit ...
Description:
Internal opto-isolator circuitry electrically isolates the development kit from the USB Smart Cable for safe programming and debugging. It comes included with the Z8FMC16100 Series Motor Control Development KitSupports the Z8 Encore!®, Z8 Encore! MC®, and Z8 Encore! XP® microcontrollers. ...
The SD/MMC PICtail Plus Daughter Board interfaces a ...
Description:
The SD/MMC PICtail Plus Daughter Board interfaces a Secure Digital (SD) or Multi-Media Card(MMC) to the SPI bus of a microcontroller. Supports wide range of SD cards listed in AN1003Supports auto-triggering of files on SD cardsOperates on wide range of ...
The MCP73871 Demo Board with Voltage Proportional Current ...
Description:
The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control. Integrated System Load SharingInput Current Limit Control hardware selected (typical 1650 mA, ...
Analog Devices EVAL-CN0349-PMDZ circuit Eval Board provides data ...
Description:
Analog Devices EVAL-CN0349-PMDZ circuit Eval Board provides data acquisition solution for processing conductivity cell outputs which includes temperature correction. This circuit is ideal for measuring the ionic content of liquids, water quality analysis, and chemical analysis. The circuit Evaluation Board ...