ON Semiconductor, KNX Transceiver Application Development Evaluation Board Transceiver Evaluation Board for NCN5120

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The NCN5120 Development Board is the ideal solution for developing your KNX application with the ON Semiconductor KNX transceiver NCN5120. The development board contains the NCN5120 KNX Transceiver which handles the transmission and reception of data on the bus. It will also generate all necessary voltages to power the board and external loads. It also contains a microcontroller with debug interface for custom firmware development. Up to 8 external switches can be monitored and up to 4 external loads can be controlled. A voltage between 3.3 V and 21 V is available to drive the external loads. The NCN5120 Development Board assures safe coupling to and decoupling from the KNX bus. Bus monitoring warns the external microcontroller for loss of power so that critical data can be stored in time.

Specificaties
Kenmerk Waarde
Interface Function Transceiver
Kit Classification Evaluation Board
For Use With Developing KNX Application
Featured Device NCN5120
Kit Name KNX Transceiver Application Development Evaluation Board
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
108,56
(excl. BTW)
131,36
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 108,56
Related Products
Done with tedious mono color backlight? This Grove ...
Description:
Done with tedious mono color backlight? This Grove enables you to set color to whatever you like via the simple and concise grove interface. It takes I2C as communication method with your microcontroller. So number of pins required for data ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. RS232 click adds RS-232 serial connectivity to your design. Provides a standard RS-232 serial port via a DB9 connectorConnects to Tx & Rx pins of microcontroller ...
An evaluation board from EXAR to demonstrate the ...
Description:
An evaluation board from EXAR to demonstrate the capabilities of the SP330E multi-protocol transceiver IC. This device supports RS-232, RS-485, and RS-422 serial standards and features a variable low-voltage logic interface capable of operating down to 1.65V. 20Mbps RS-485 and ...
The EB060 board allows you to integrate RC5 ...
Description:
The EB060 board allows you to integrate RC5 and other infrared protocols into your e-blocks designs.Features & Benefits of the EB060 Infrared Board•Tuned and filtered IR receiver that demodulates the incoming IR signal to provide excellent selectivity and signal conditioning•Transmitter ...