FTDI Chip, 3.3 V TTL 2mm pitch USB to UART Cable, TTL-232R-3V3-2mm

  • RS-stocknr. 687-7780
  • Fabrikantnummer TTL-232R-3V3-2mm
  • Fabrikant FTDI Chip
Wetgeving en compliance


The FTDI Chip USB to UART cable provides a fast and simple way to connect devices with a TTL level serial interface to a USB. Each cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector at the end of the cable. The circuit is powered from the USB using 5V power pins and any VCC connection is always at 5VDC. However, this cable is available with signal TTL logic level of 3.3V. This cable is supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

USB 2.0 compatible
Cable length of 1.8m
Data transfer rate is up to 3Mbps
Unique serial number attached, used for security purposes while transferring files via cable
Powered from USB connector
Various UART-end connector options available
Maximum output of 250mA on VCC
Low USB bandwidth consumption
UHCI/OHCI/EHCI host controller compatible
Operating temperature ranges between -40°C and 85°C
2mm pitch connector for use with FTDI VDRIVE2 or VMUSIC2 modules


USB to serial TTL level converter
Upgrading legacy peripherals to USB
Interface microcontroller UART or I/O to USB
Interface FPGA/PLD to USB
Interface to FTDI VDRIVE2 or VMUSIC2 modules
Replace MAX232 type level shifters allowing for direct connection of the products to PC via a USB
USB instrumentation PC interface
USB industrial control
USB software/hardware encryption dongles


FCC certified

Kenmerk Waarde
Interface Function USB to UART
Kit Classification Cable
Kit Name 3.3 V TTL 2mm pitch
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17-12-2020, met een levertijd van 1 werkdag.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 19,29
10 - 19
€ 18,33
20 - 49
€ 17,42
50 - 99
€ 16,53
100 +
€ 15,73
Related Products
The EVAL232R is a USB to RS232 development ...
The EVAL232R is a USB to RS232 development and evaluation module for the FT232RL IC device. Additional header pins on the board which provide access to the FT232RL device's configurable CBUS interface pins. Powered from USB, the EVAL232R supports both ...
These modules are MCU to USB host controller ...
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The LC234X module provides a low cost USB ...
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The USB-COM-PLUS modules provide a simple method of ...
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. (687-7730) USB-COM232-Plus1 - USB to RS232 Adapter(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter(687-7742) USB-COM232-Plus4 - USB to ...