FTDI Chip, 3.3 V TTL 3.5mm Jack USB to UART Cable, TTL-232R-3V3-AJ

  • RS-stocknr. 687-7783
  • Fabrikantnummer TTL-232R-3V3-AJ
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FTDI Chip USB To UART Cable

The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. It is available with TTL logic level of 3.3V. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are terminated by a standard 3.5mm Audio Jack (AJ) connector. The circuit is powered from the USB using 5V power pins and any Vcc connection, always at 5VDC. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

Connect directly to a microcontroller UART or I/O pins
Data transfer rate is up to 3Mbps
Has 35mm audio jack
Low USB bandwidth consumption
Operating temperature ranges between -40°C and 85°C
Provides a USB to TTL Serial interface with various end connectors
Powered from USB connector
Two core and spiral cable with length of 1.8m
UHCI/OHCI/EHCI host controller compatible
Unique serial number attached, used for security purposes while transferring files via cable
USB 2.0 full speed compatible
Various UART-end connector options available

Applications

Communication
Embedded system

Certifications

CE
FCC approved

Specificaties
Kenmerk Waarde
Interface Function USB to UART
Kit Classification Cable
Kit Name 3.3 V TTL 3.5mm Jack
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-08-2020, met een levertijd van 1 werkdag.
Prijs Each
19,29
(excl. BTW)
23,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 19,29
10 - 19
€ 17,43
20 - 49
€ 16,58
50 - 99
€ 16,08
100 +
€ 14,70
Related Products
The Isolated RS232/RS485 Evaluation Kit is a demonstration ...
Description:
The Isolated RS232/RS485 Evaluation Kit is a demonstration and evaluation platform for creating Isolated RS232 and RS485 solutions. It can be used in conjunction with EFM32 and EFM8 MCU Stater Kits (STKs). It simplifies the process of creating an isolated ...
The UMFT60xA and UMFT60xX range of evaluation/development modules ...
Description:
The UMFT60xA and UMFT60xX range of evaluation/development modules incorporate either HSMC/FMC(LPC) connectors for interfacing FTDI’s FT600/FT601 USB 3.0 Super speed IC with external hardware. The series allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality ...
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. (687-7730) USB-COM232-Plus1 - USB to RS232 Adapter(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter(687-7742) USB-COM232-Plus4 - USB to ...
Designed to replace an existing DE9 connector, (male ...
Description:
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connectorThe modules contain a USB-Serial bridge IC and ...